روشهای متعددی برای کاهش نرخ خوردگی در نظر گرفته شده است. یکی از روشهای موثر محافظت در برابر خوردگی، استفاده از پوششهای تبدیلی میباشد. اما، پژوهشها برای یافتن جایگزین مناسب برای پوششهای تبدیلی به علت معضلات محیط زیستی و سرطانزایی از سال 1970 میلادی شروع شده است. یکی از مهمترین جایگزین این پوششها به-خصوص برای سامانههای تکلایه، پوششهای سل ژل از نوع سیلان، حاوی بازدارندهی خوردگی است که علاوه بر جبران مشکلات زیستمحیطی، توانسته است خواص حفاظت خوردگی مطلوبتری نسبت به پوششهای تبدیلی متداول ازخود نشان دهد. علاوه بر این، روش سل ژل یک روش سازگار با محیط زیست است که بهبود عملکرد محافظتی آن در زمینههای مختلف مانند فولاد، آلومینیوم، مس، منیزیم و آلیاژهای آنها، مشاهده شده است. دراین روش ناخالصیها به آن وارد نمیشود و در پایان فرایند، محصول نیاز به شستشو ندارد. دمای فرایند سل ژل به طور کلی کم است (اغلب نزدیک به دمای اتاق) بنابراین تبخیر حرارتی ترکیبات آن مانند بازدارندههای معدنی به حداقل میرسد. از آنجا که از پیشمادههای مایع دراین روش استفاده میشود، امکان تولید پوششهایی برای شکلهای پیچیده و همچنین تولید فیلمهای نازک بدون نیاز به ذوب کردن وجود دارد.
Numerous approaches are in practice to mitigate corrosion. Among all of these approaches, conversion coatings play an effective/promising role in corrosion protection. However, studies have begun to find an alternative to conversion coatings due to environmental problems and carcinogens since the 1970s. One of the most important alternatives to these coatings is the silane-based sol-gel coating containing a corrosion inhibitor which in addition to environmental problems, has improved corrosion protection properties compared to conventional conversion coatings. In addition, the sol gel method is an environmentally friendly method that has been shown to improve the protective performance of sol gel coatings in various fields such as metal, such as steel, aluminum, copper, magnesium and alloys. In this method, impurities do not enter and at the end of the process, the product does not need to rinse. The sol gel process temperature is generally low (often close to room temperature), so thermal evaporation and degradation of receptor species, such as inorganic inhibitors, are minimized. Because liquid precursors are used in this method, it is possible to produce complex coatings as well as to produce thin films without the need for machining or melting.
صنعت نساجی یکی از صنایعی است که پساب آنها بهعنوان یکی از بزرگترین مخاطرات محیطزیست شناخته میشود. پساب این صنعت حاوی مقدار زیادی ماده رنگزا، مواد شیمیایی و فلزات سنگین استکه برای سلامتی انسان و محیطزیست خطرناک هستند. انعقاد، روش زیستیو اکسایش پیشرفتهازجمله روشهای کاربردی هستند که در تصفیه پسابها مورداستفاده قرار میگیرند. سازوکار اصلی فرآیندهای اکسایش پیشرفته بر پایه تولید رادیکال هیدروکسیل است که این رادیکالها قادرند ترکیبات مقاوم در برابر اکسایش را تخریب کنند. همچنین، استفاده از نیمهرساناهایی با شکاف انرژی مناسب که بتوانند پاسخ خوبی در برابر تهییج نور مرئی از خود نشان دهند به بهبود این فرآیند کمک شایانی میکند. از طرفی، اکسید گرافن کاهشیافته برای بهبود خواص فوتوکاتالیستی و درنتیجه بهبود حرکت الکترونها به کار گرفته میشوند. لذا، همراهی این دو ماده در کامپوزیت، بازده عملکرد فوتوکاتالیستی را به میزان قابلتوجهی افزایش داده و سبب ایجاد خواص جذب بالا و رسانایی شده که این امر سبب میشود، تخریب نوری آلودگیها به مقدار به سزایی تسهیل گردد. حال، قرارگیری این مواد در غشا پلیمری، ضمن بهبود فرآیند فوتوکاتالیستی از ورود ذرات کاتالیزورنوری به داخل پساب تصفیهشده نیز ممانعت به عمل میآورد.
Textile industry is one of the industries that its waste has been known as one of the most important environmental hazards. This wastewater contains large amount of dyes, chemicals compounds and heavy metals that are dangerous to human health and the environment. Coagulation, biological methods and advanced oxidation are the most widely used methods in the treatment of wastewater. The main mechanism of advanced oxidation processes generates low waste and uses hydroxyl radicals as their main oxidative power, which these radicals can destroy oxidation-resistant compounds. Also, the use of semiconductors with a suitable energy gap that can respond well to the stimulation of visible light helps to improve this process. On the other hand, reduced graphene oxide is used to improve photocatalytic properties and, consequently, to improve the motion of electrons. Therefore, the combination of these two materials in the composite significantly increases the photocatalytic performance efficiency and causes high absorption and conductivity properties, which resulted to degradation of the pollutants.In addition, fixing these materials in the polymer membrane, while improving the photocatalytic process can prevent of dispersion of photocatalyst particles into refined effluents.
توسعه زندگی اجتماعی و صنعتیشدن کشورها منجر به آلودگیهای زیستمحیطی فراوانی شده است. از میان آلایندههای صنعتی که به جریانهای آبی ورود پیدا میکنند، مواد رنگزا به دلیل پایداری و مقاومت شیمیایی از اهمیت ویژهای برخوردار هستند. با توجه به پیچیدگی آلایندههای ورودی به منابع آبی، استفاده از روشی با کارایی بالا در حذف مواد رنگزا، امری اجتنابناپذیر میباشد. از میان جاذبهای مختلف، نانوالیاف پلیمری، به دلیل وزن کم، سطح مخصوص زیاد، ساختار متخلخل پیوسته و قابلیت عاملدار شدن، به عنوان مواد غشایی موثر، در زمینه پالایشهای زیستمحیطی بکارگرفته میشوند. علاوهبراین، جاذبهای نانولیفی اصلاح شده، عملکرد جذب را بهطور موثری بهبود میبخشند. در این مقاله، تحقیقات مختلف انجام شده در زمینه کاربرد نانوالیاف پلیمری مختلف در جداسازی موادرنگزا از آب، مرور و نتایج تحقیقات انجام شده در هر مورد بررسی و مقایسه شده است.
The development of social life and the industrialization of countries have led to increased environmental pollution.Among the industrial pollutants entering the water flow, synthetic dyes are of particular importance due to their chemical stability and resistance to bio-degradation. Due to the complexity of contaminants found in the water resources, the use of high-performance adsorbents in dye removal is unavoidable. Among the various adsorbents, polymer-based electrospun nanofibres can be used as effective membrane materials for environmental refinement due to light weight, high surface area and continuous porous structure and functionality. In addition, modified nanofiber adsorbents improve the absorption performance effectively. In this study, several investigations reported on the field of the application of polymeric nanofibers in dyes separation from aqueous media have been reviewed and the results of the reported literature in each case, have been studied and compared.
گیاهان بسیاری در سراسر جهان شناخته شده اند که دارای خواص دارویی-پزشکی از جمله خواص ضدباکتری، ضدمیکروبی و ضدقارچ هستند. ترکیبات شیمیایی ضدباکتری و یا ضدمیکروبی احتمال ایجاد حساسیت یا آلرژی در کاربر را دارند. علاوه بر این در فرآیند تولید و به کارگیری میتوانند پسابهای زیادی را وارد محیطزیست کنند که تصفیه و بازیافت آنها هزینه بر است. تحقیقات زیادی در این رابطه انجام شده که با بهرهگیری از ترکیبات گیاهی دارای این خاصیت بتوان خاصیت ضدباکتری و ضدمیکروبی و قارچ را در منسوجات ایجاد نمود. منسوجات یکی از ملزومات ضروری است که همه انسانها به وفور در زندگی خود از آنها استفاده مینمایند. امروزه به دلایل مختلفی از جمله مشکلات زیست محیطی تمایل به استفاده از ترکیبات طبیعی به جای مواد مصنوعی در صنایع نساجی از جمله فرآیند رنگرزی افزایش یافته است. علاوه بر این در فرآیند رنگرزی استفاده از برخی ترکیبات گیاهی (رنگدهنده و یا غیررنگی) میتواند خواص ضدباکتری، ضدمیکروبی و ضدقارچ را حاصل نماید. این پژوهش مطالعات صورت گرفته در این حوزه و نتایج حاصل را به صورت مجموعهای مدون نموده تا در تحقیقات آتی و کاربردی مورد استفاده قرار گیرد.
Today, for various reasons, including environmental problems, natural ingredients are used instead of synthetic materials in the textile industry, specially the dyeing process. In addition, in the dyeing process, the use of some other herbal compounds gives special properties. Antibacterial or antimicrobial chemical compounds in the production and using process induce a lot of wastewater into the environment, which is costly to clean and recycle. Textiles are one of the inevitable requirements that all humans use in their lives abundantly. Today, for various reasons, including environmental problems, the tendency to use natural compounds instead of synthetic materials has increased in the textile industry, including the dyeing process. Furthermore, using the herbal compounds can create special properties such as antibacterial and antimicrobial properties in textiles. A lot of research has been done in this regard. This research has been reviewed the results of researches in this area and classified them that will be easy for using in the new research and application of results.
روش ماکروویو به عنوان یک فرآیند جدید برای سنتز انواع ترکیبات آلی ازجمله مواد رنگزا مورد توجه قرار گرفته است. این روش دارای مزایای متعددی است که عبارتند از: سهولت انجام، سریع بودن، مقرون به صرفه بودن و بازدهی بالا. مواد رنگزا کاربردهای زیادی در حوزههای مختلف دارند. مواد رنگزای آلی دارای ویژگیهای فوتوفیزیکی و فوتوشیمیایی و کاربردهای زیستی متفاوتی هستند. مهمترین گروههای مواد رنگزا که با روش ماکروویو توسعه یافتهاند عبارتند از: نفتالیمیدها، فنوتیازینها، فلورسئینها، پیریدینیم، سیانینها، کوئینولینها، کومارینها، تریآزوکوئینوکسازینها و ترکیبات مونوآزو دیسپرس. عواملی مانند دما، نوع حلال و قدرت تابش بر روی پیشرفت واکنش و بازده نهایی اثر بسزایی دارند. انتقال انرژی توسط فرآیند ماکروویو در محیط واکنش در حدود 9-10 ثانیه است. این مقاله مروری بر کاربرد روش ماکروویو برای سنتز مواد رنگزا با ویژگیهای فلورسنس، لومینسانس و فوتوفیزیکی است.
The microwave-assisted has been regarded as a new strategy in the synthesis various organic compounds especially organic dye. The technique offers a lot of advantages as it is simple, rapid, economic and efficient. Dyes are effective molecules have pivotal effects in several fields. Organic dyes were endowed with a diverse of photophysical and photochemical and biomedical applications. Novel microwave synthetic method for many types of dyes including naphthalimides, phenothiazines, fluorescein, pyridinones, cyanines, quinolines, coumarins, triazoloquinoxalines and monoazo disperse dyes were demonstrated. Factors like temperature, type of solvent and power control microwave reactions. Microwaves possess the potential to transport energy from one medium to another in a small duration of 10−9 s with every run of electromagnetic energy. This review highlights microwave applications for the synthesis of dyes with fluorescence, luminescence and photophysical properties.
اغلب پوششهای آلی بهدست آمده از تولید محصولات تجاری رنگ و پوشش، ویسکوالاستیک میباشند. مطالعه رفتار ویسکوالاستیک این پوششها بعد از پخت آنها یکی از آزمونهای مهم است که اطلاعات مفیدی را در مورد عملکرد پوشش پخت شده در اختیار ما قرار میدهد. در این مقاله رفتار ویسکوالاستیک رزینها، پوششها و نانوکامپوزیتهای آنها با استفاده از دستگاه آنالیز دینامیکی، مکانیکی حرارتی(DMTA) بررسی شده است. به کمک DMTA مقادیر مدول ذخیره، مدول اتلاف و همچنین ترم اتلاف به عنوان تابعی از دما یا بسامد بدست میآیند. DMTA یک روش مفید برای بررسی ساختار پلیمر مانند متوسط وزن ملکولی بین زنجیرهای شبکهایشده، چگالی شبکهایشدن، میزان همگن یا ناهمگن بودن رزینهای شبکهای شده، میزان امتزاجپذیری در ترکیب رزینها، میزان نسبی پراکنش نانوذرات در بستر رزین میباشد. همچنین کمیتهای فیزیکی مختلفی مانند نقطه ژلشدن، دمای انتقال شیشهای، چگالی شبکهایشدن، درصد تبدیل پخت، گرانروی کمینه در حین فرآیند پخت، انرژی فعالسازی دمای انتقال شیشهای، ضریب شکنندگی، ضریب جابجایی در رابطه ویلیام- لاندل- فری (WLF) و بررسی انتقالهای α و β و γ به کمک DMTA مورد بررسی قرار میگیرد.
Most organic coatings obtained from commercial paint and coating products are viscoelastic. The study of the viscoelastic behavior of these coatings after curing is one of the important tests that provide useful information on the performance of the cured coating. In this paper the viscoelastic properties of resins, coatings and their nanocomposites using the dynamic mechanical thermal analysis (DMTA) is investigated. With DMTA, the values of storage modulus, loss modulus and also the loss term as a function of temperature or frequency are obtained. DMTA is a useful method for investigating the polymer structure, such as the average molecular weight of the cross-linked chains, cross-link density, the homogeneity or heterogeneity of the cross-linked resins, the degree of incompatibility in the resin composition, the distribution of nanoparticles in the resin matrix. Also different physical quantities such as gelatinization point, glass transition temperature, cross-link density, curing conversion percentage, minimum viscosity during curing process, energy of activation of glass transition temperature, brittleness coefficient, displacement coefficient in the William-Lundley-Fry (WLF) relation and investigation of α, β and γ transitions are investigated using DMTA.