@article { author = {Hemmati, Saeed and Najafi, Farhood and Shirkavand Hadavand, Behzad}, title = {A Review on Fluoropolymers Coatings}, journal = {Journal of Studies in Color World}, volume = {10}, number = {2}, pages = {1-10}, year = {2020}, publisher = {Institute for Color Science and Technology}, issn = {2251-7278}, eissn = {2383-2223}, doi = {}, abstract = {In recent years, coatings with special propertiessuch as hydrophobic, oleophobic, resistance to chemical, corrosion and weathering have been developed in many countries and have received more attention. One of the materials used in the manufacture of these coatings is fluoropolymers. The use of fluoropolymers in coatings has many advantages due to the unique characteristics of these polymers such as, hydrophobicity, high thermal and chemical stability, low surface energy, low dielectric constant and resistance to weathering and corrosion. The main characteristics of fluoropolymers are due to their atomic structure of fluorine and carbon and their covalent bond (C-F). The main problems of fluoropolymers for using in coatings are their very poor solubility in organic solvents and very high temperatures process. Conventional fluoropolymers used in coatings include polytetrafluoroethylene (PTFE), fluorinated ethylene propylene copolymers (FEP), perfluoroalkoxy alkanes copolymers (PFA), ethylene tetrafluoroethylene copolymers (ETFE), polyvinylidene fluoride (PVDF), ethylene chlorotrifluoroethylene (ECTFE) and fluoroethylene vinyl ether (FEVE). In addition, polymer-based fluorinated olefins, especially fluoro acrylates, fluoro-silicon acrylates, fluoro-urethanes and perfluorinated polymers have special properties that have increased their application in coatings.}, keywords = {Fluoropolymers,coating,Special properties,Hydrophobic,Chemical resistance}, title_fa = {مروری بر پوشش‌های فلوئورو پلیمرها}, abstract_fa = {در سال‌های اخیر پوشش‌های با خواص ویژه مانند آب‌گریزی، روغن‌گریزی، مقاومت به مواد شیمیایی، خوردگی و شرایط جوی در کشورهای زیادی توسعه یافته و بسیار مورد توجه قرار گرفته‌اند. یکی از موادی که از آن در ساخت این پوشش‌ها استفاده می‌شود، فلوئورو پلیمرها می‌باشد. استفاده از فلوئورو پلیمرها در پوشش‌ها دارای مزایای زیادی می‌باشد و دلیل آن ویژگی‌های منحصر به فرد این پلیمرها از جمله، آب‌گریزی، پایداری گرمایی و شیمیایی بالا، انرژی سطحی پایین، ثابت دی‌الکتریک پایین و مقاومت در برابر هوازدگی و خوردگی می‌باشد. ویژگی‌های اصلی فلوئورو پلیمرها به دلیل ساختار اتمی فلوئور و کربن و پیوند کوالانسی (C-F) آن‌ها می‌باشد. مشکل اصلی استفاده از فلوئورو پلیمرها در پوشش، حلالیت بسیار ضعیف آنها در حلال‌های آلی و نیاز به دمای فرآیند بسیار بالای آن‌ها می‌باشد. فلوئورو پلیمرهای مرسوم که در پوشش‌ها استفاده می‌شود شامل پلی تترافلوئورو اتیلن(PTFE) ، کوپلیمرهای اتیلن پروپیلن فلوئوردارشده(FEP) ، کوپلیمرهای پرفلوئورو آلکوکسی (PFA)، کوپلیمرهای اتیلن تترافلوئورو اتیلن (ETFE)، پلی وینیلیدین فلوئوراید(PVDF) ، کوپلیمر اتیلن کلرو تری‌فلوئورو اتیلن(ECTFE) ، فلوئورو اتیلن وینیل اتر (FEVE) می‌باشد. به علاوه اینکه الفین‌های فلوئوردارشده پایه پلیمری، به ویژه فلوئور آکریلات‌ها، فلوئورو سیلیکون آکریلات‌ها، فلوئورو یورتان‌ها، پرفلوئورو پلیمرها خواص ویژه‌ای را به نمایش گذاشته‌اند که باعث افزایش کاربرد آنها در پوشش‌ها شده است.}, keywords_fa = {فلوئوروپلیمرها,پوشش,خواص ویژه,آب‌گریز,مقاومت شیمیایی}, url = {https://jscw.icrc.ac.ir/article_81680.html}, eprint = {https://jscw.icrc.ac.ir/article_81680_4d71cdf8ec1cfa6464165eb2a0127937.pdf} } @article { author = {Mahdiani, Mojgan and Rouhani, Shohre and Zahedi, Payam}, title = {A Review on Flourescense Sensores Based on Bronic acides for Sacharides Detection}, journal = {Journal of Studies in Color World}, volume = {10}, number = {2}, pages = {11-28}, year = {2020}, publisher = {Institute for Color Science and Technology}, issn = {2251-7278}, eissn = {2383-2223}, doi = {}, abstract = {Nowadays, the use of sensitive and selective fluorescent sensors for biological and clinical applications has been important for the early detection and control of various diseases. Since saccharides play an important role in biological processes, their detection is one of the particular importance and there is an urgent need to develop of technology for the continuous control of glucose in patients. Bronic acids, can be reversed and covalently formed by the diols in aqueous solution to form five or six ring esters. Based on this phenomenon, compounds containing bronic acid have been used as receptors in sensors. In this paper, fluorescent sensors based on dyes with bronic acids are introduced.}, keywords = {Fluorescent sensors,Saccharides,Bronic acids,Dye,Detection}, title_fa = {مروری بر کاربرد مواد رنگزا در حسگرهای فلورسنتی تشخیص ساکارید}, abstract_fa = {امروزه استفاده از حسگرهای فلورسنتی حساس و گزینش‌پذیر جهت کاربردهای زیستی و پزشکی برای تشخیص و کنترل زودهنگام بیماری‌های مختلف اهمیت چشمگیری پیدا کرده است. از آنجا که ساکارید‌ها نقش بسیار مهمی در فرآیندهای زیستی ایفا می‌کنند، تشخیص آنها از اهمیت ویژه‌ای برخوردار است و نیاز مبرم به توسعه فناوری برای کنترل مداوم قند در بیماران وجود دارد. اسید برونیک‌ها، در محلول آبی به صورت برگشت‌پذیر و کوالانسی با دی ال‌ها تشکیل استر پنج یا شش‌حلقه‌ای می‌دهند. بر اساس این پدیده، ترکیبات حاوی اسید برونیک به عنوان گیرنده در حسگرها بکار گرفته شده اند. در این مقاله حسگرهای فلورسنتی مبتنی بر مواد رنگزای عامل دار شده با اسید برونیک‌ها معرفی شده است.}, keywords_fa = {حسگر فلورسنتی,ساکارید,اسید برونیک,مواد رنگزا,تشخیص}, url = {https://jscw.icrc.ac.ir/article_81695.html}, eprint = {https://jscw.icrc.ac.ir/article_81695_8b901ec47ef762e661cf72a7d66cc308.pdf} } @article { author = {Khamseh, Sara and Alibakhshi, Eiman}, title = {Biomedical Applications of Nanostructured Carbon-Based Coatings}, journal = {Journal of Studies in Color World}, volume = {10}, number = {2}, pages = {29-40}, year = {2020}, publisher = {Institute for Color Science and Technology}, issn = {2251-7278}, eissn = {2383-2223}, doi = {}, abstract = {The repair and replacement of diseased tissues and injured organs of humans is increasing day by day. Long lifetime and high biocompatibility are two main factors in the process of designing and manufacturing components used in medicine (such as biological implants). Wear is one of the biggest problems with the parts used in medicine. The protective coatings can be used to improve the wear resistance. On the other hand, most of the biodegradable parts are metallic, and there is a possibility that dangerous metal ions will be released from their surface and enter the body. Protective coatings can be used as a barrier against the release and penetration of ions affect the body's tissues. Numerous studies have shown that nanostructured diamond-like carbon coatings (DLC) have the ability to create these properties on the surface of biological components. These coatings are produced with several methods, such as the physical vapor barrier layer (PVD) and the chemical vapor barrier chemical layer (CVD), and by doping elements of nitrogen, copper and silver, unique properties can be created on their surface. The present paper includes studies in the field of using diamond carbon nanostructured coatings such as (DLC) in medical applications such as orthopedics, cardiovascular system, ophthalmology and dentistry.  }, keywords = {diamond-like carbon coatings,biomedical,biocompatibility,Synthesis methods}, title_fa = {کاربردهای زیستی پوشش‌های نانوساختار بر پایه کربن}, abstract_fa = {تعمیر و جایگزینی بافت‌ها و اندام‌های بیمار و آسیب دیده انسانی با استفاده از قطعات روز به روز در حال افزایش است. طول عمر و زیست‌سازگاری بالا، دو عامل اصلی در فرآیند طراحی و ساخت قطعات مورد استفاده در پزشکی (نظیر ایمپلنت‌های زیستی)، محسوب می‌شوند. یکی از بزرگ‌ترین مشکلات قطعات مورد استفاده در پزشکی سایش می‌باشد. به‌منظور بهبود مقاومت سایشی، می‌توان از پوشش‌های محافظتی استفاده نمود. از سوی دیگر، بیشتر قطعات زیستی فلزی بوده و احتمال آزاد شدن یون‌های فلزی خطرناک از سطح آن‌ها و ورود آن‌ها به بدن وجود دارد که این پوشش محافظ می‌تواند به عنوان سدی در برابر آزاد شدن و نفوذ یون‌ها به بافت بدن عمل نمایند. نتایج تحقیقات متعدد نشان داده است که پوشش‌های نانوساختار پوشش‌های الماس‌گون کربنی (Diamond-Like Carbon (DLC)) توانایی ایجاد این خواص را بر سطح قطعات زیستی دارند. پوشش‌های الماس‌گون کربنی به‌دلیل وجود نواحی گرافیتی بر سطح خود، ضریب اصطکاک بسیار پائینی داشته و مقاومت سایشی پوشش‌ها را بهبود می‌بخشند. از طرفی با کنترل شرایط اعمال آن‌ها، می‌توان پوشش‌هایی با خواص مکانیکی خوب و سختی بالا (حدود الماس) را به‌دست آورد که خواص تریبولوژی سطح را به میزان قابل ملاحظه‌ای بهبود خواهند بخشید. این پوشش‌ها به روش‌های متعددی نظیر لایه نشانی فیزیکی از فاز بخار (PVD) و لایه نشانی شیمیایی از فاز بخار (CVD) تهیه می‌شوند و با اضافه کردن عناصری نظیر نیتروژن، مس و نقره می‌توان خواص ویژه‌ای را بر سطح آن‌ها بوجود آورد. مقاله حاضر در برگیرنده‌ مطالعات انجام شده در حوزه‌ استفاده از پوشش‌های نانوساختار الماس‌گون کربنی (DLC) در کاربردهای پزشکی نظیر ارتوپدی، سامانه قلبی عروقی، چشم پزشکی (لنزهای تماسی) و دندانپزشکی می‌باشد.}, keywords_fa = {پوشش‌های الماس گون کربنی,زیست‌پزشکی,زیست‌سازگاری,روش‌های تهیه}, url = {https://jscw.icrc.ac.ir/article_81704.html}, eprint = {https://jscw.icrc.ac.ir/article_81704_9f81959a4dd543220853435d4af1052d.pdf} } @article { author = {karimi, zahra and Allahverdi, Ali and Oshani, Fateme}, title = {Investigation on the Removal of Dyes from Wastewater Using Alumina Composite Nano Adsorbent}, journal = {Journal of Studies in Color World}, volume = {10}, number = {2}, pages = {41-59}, year = {2020}, publisher = {Institute for Color Science and Technology}, issn = {2251-7278}, eissn = {2383-2223}, doi = {}, abstract = {The adsorption process is an effective method that is widely applied to remove dyes from wastewater due to its simplicity, availability, ease of process and reasonable price. Nano adsorbents with unique properties such as larger surface area, surface interactions and improved reactivity are providing new opportunities for removal of pollutants using an efficient and cost-effective method compared to other methods. In the meanwhile, a group of alumina nanocomposites have been considered as adsorbents owing to their high surface area, good mechanical properties and great resistance to thermal degradation. Nanocomposites consist of at least two phases that are dispersed into each other to form a three-dimensional network.  Nanocomposites display different properties of bulk material. In this study, the adsorption capacity of alumina-based composite Nano adsorbents, including alumina-carbon nanotubes, activated carbon, metal oxides, polymer and chitosan has been investigated. In the following, the removal of dyes and organic compounds by alumina-based composite Nano adsorbents and adsorption influencing factors has been reviewed. The effect of various factors on the adsorption capacity of alumina-based composite Nano adsorbents and the adsorption mechanism show that all alumina-based composite Nano adsorbents exhibit excellent adsorption capacity for dye removal.  Reviews indicate that Alumina/ Carbon nanotube (CNT) composite is used as an adsorbent to remove dyes. Alumina can affect compressive strength, hydrophilicity, porosity and CNT adsorption capacity. Alumina/CNT composite can multiply the adsorption capacity. Alumina / activated carbon composite can increase the adsorption owing to occurring adsorption process physically and chemically. Activated carbon possespore that can adsorb and alumina has functional groups in order to react with the dye.Chitosan contains functional groups -OH and amino -NH2 that can bind to the dye. Still, chitosan has a strong tendency to agglomerate and form a gel, so many of its functional groups lose the ability to react with the dye. Alumina/chitosan composite improves binding sites and mechanical stability.}, keywords = {Alumina Composite,Adsorption,Nano adsorbent,Dye removal}, title_fa = {بررسی حذف مواد رنگزا از پساب با استفاده از نانوجاذب‌های کامپوزیت آلومینا}, abstract_fa = {فرآیند جذب سطحی یک روش موثر است که به دلیل ساد‌گی، در دسترس‌بودن، آسانی فرآیند و قیمت مناسب آن به صورت گسترده برای حذف مواد رنگزا از پساب استفاده می‌شود.نانوجاذب‌ها با خواص منحصر به فرد نظیر مساحت سطح بزرگ‌تر، فعل و انفعالات در روی سطح و بهبود واکنش‌پذیری فرصت‌های جدیدی برای حذف آلاینده‌ها با استفاده از یک روش کارآمد و مقرون به صرفه در مقایسه با سایر روش‌ها فراهم می‌کنند. در این میان،  گروهی از نانوکامپوزیت‌های آلومینا به صورت جاذب به دلیل مساحت سطح بالا، خواص مکانیکی خوب و مقاومت مناسب در مقابل تخریب حرارتی مورد توجه قرار گرفته‌اند. نانوکامپوزیت‌ها شامل حداقل دوفاز هستند که یکی در دیگری پراکنده ‌شده و یک شبکه سه‌بعدی ایجاد می‌شود. نانوکامپوزیت‌ها خواصی متفاوت از مواد سازنده اولیه خودشان دارند. در این تحقیق به‌بررسی ظرفیت جذب نانوجاذب‌های کامپوزیت آلومینا شامل آلومینا- نانولوله‌های کربنی، کربن فعال، اکسیدهای فلزی، پلیمر و کیتوسان پرداخته شده است. در ادامه، حذف مواد رنگزا و ترکیبات آلی توسط نانوجاذب‌های کامپوزیت آلومینا و عوامل موثر بر جذب بررسی شده‌ است. تاثیر عوامل مختلف بر ظرفیت جذب نانوجاذب‌های کامپوزیت آلومینا و سازوکار جذب نشان می‌دهد که کلیه‌ نانوجاذب‌های کامپوزیت آلومینا دارای ظرفیت جذب بهتری برای حذف مواد رنگزا نسبت به نانوجاذب آلومینای ساده هستند. بررسی‌ها نشان می‌دهند که، کامپوزیت آلومینا/ نانولوله‌های کربنی (CNT) به‌عنوان جاذب برای حذف مواد رنگزا استفاده می‌شود. آلومینا می‌تواند بر روی مقاومت فشاری، آب‌دوستی، تخلخل و ظرفیت جذب CNT اثر بگذارد. کامپوزیت آلومینا/ CNT می‌تواند ظرفیت جذب را چند برابر افزایش دهد. کامپوزیت آلومینا/ کربن فعال می‌تواند جذب‌سطحی را افزایش دهد زیرا فرآیند جذب‌سطحی به‌صورت فیزیکی و شیمیایی رخ می‌دهد. کربن فعال حفراتی دارد که می‌تواند جذب را انجام و آلومینا گروه‌های عاملی دارد که می‌تواند با ماده رنگزا واکنش دهد. کیتوسان شامل گروه‌های عاملی OH - و آمینو NH2- می‌باشد که می‌تواند با ماده رنگزا اتصال یابد. اما کیتوسان تمایل زیادی به تجمع‌یافتن و تشکیل ژل دارد و مقدار زیادی گروه‌های عاملی آن توانایی واکنش‌دادن با ماده رنگزا از دست می‌دهند. کامپوزیت آلومینا/ کیتوسان مکان‌های اتصال و پایداری مکانیکی را بهبود می‌دهد.}, keywords_fa = {کامپوزیت آلومینا/CNT,کامپوزیت آلومینا/کربن‌فعال,جذب‌سطحی,نانوجاذب,حذف مواد رنگزا}, url = {https://jscw.icrc.ac.ir/article_81705.html}, eprint = {https://jscw.icrc.ac.ir/article_81705_fc5976b450d4b2494d9bed2b2c4e4373.pdf} } @article { author = {Sedghi, yassin and Razani, mehdi and Ghaeini, Zohre and Sabohi-sani, Farahangiz}, title = {An Overview of the Colors Used in the Decoration of Pottery Motifs of the Bronze Age in the Ancient Sites of Sistan and Balouchistan}, journal = {Journal of Studies in Color World}, volume = {10}, number = {2}, pages = {61-72}, year = {2020}, publisher = {Institute for Color Science and Technology}, issn = {2251-7278}, eissn = {2383-2223}, doi = {}, abstract = {Color in the ancient world is one of the most important things in human history because it has led to the creation of important works in the history of art. One of the important aspects of using paint during the prehistoric period has been the decoration of various types of pottery, which has led to a special style in the art of different regions of Iran. Identifying the type of colors used by prehistoric artists can be one of the most prominent archaeological questions in prehistoric time.In this research, the subject of recognizing the type of paints on the pottery of the Bronze Age sites of Sistan and Balouchistan has been studied. The results of this study, which is the result of recognizing color in the pottery of significant areas such as; Shahr-i Sokhta, Bampur, Chegerdak and Spidej and Keshik Cemetery demonstrated that the use of black and brown-red colors is common in pottery in the southeastern areas, and their main sources have been iron oxide and manganese oxides. Black and dark colors are composed of manganese oxide, as well as a combination of two iron-manganese oxides, and brown-red colors are composed of iron oxide.}, keywords = {Painted pottery,Ancient colors,Bronze age,Southeast of Iran}, title_fa = {بررسی و مرور نوع رنگ‌های به‌کاررفته در تزئینات نقوش سفالینه‌های به‌دست آمده از محوطه‌های عصر مفرغی سیستان ‌و بلوچستان}, abstract_fa = {رنگ در دنیای باستان یکی از نمودهای بسیار حائز اهمیت تاریخ بشر است زیرا که با خلق آثار مهمی در تاریخ همراه بوده است. یکی از جنبه‌‌های مهم استفاده از رنگ در دوران پیش‌ از تاریخ، تزئین انواع آثار سفالین بوده است که منجر به خلق مهم‌‌ترین و زیباترین آثار شده است. شناسایی نوع رنگ‌‌های به‌کاررفته توسط هنرمندان پیش ‌از تاریخ، می‌‌تواند یکی از برجسته‌‌ترین پرسش‌های باستان‌‌شناسی این دوره باشد. درهمین‌راستا سعی شده است تا در این پژوهش نوع رنگ‌‌های موجود بر روی سفال‌‌های محوطه‌های عصر مفرغ سیستان و بلوچستان شناسایی و به بحث درباره‌‌ انواع آنها پرداخته شوند. نتایج بررسی‌‌ها و مطالعات در این پژوهش، استفاده از رنگ‌های سیاه و قهوه‌ای-قرمز در سفال‌های محوطه‌‌های جنوب‌شرق را نشان می‌‌دهد که منبع آن‌ها اکسید آهن و اکسید منگنز شناسایی شده‌‌اند. رنگ‌‌های سیاه و تیره از اکسید منگنز و نیز ترکیب دو اکسید آهن-منگنز و رنگ‌‌های قهوه‌‌ای-قرمز از اکسید آهن تشکیل‌ شده‌اند.}, keywords_fa = {سفال منقوش,رنگ‌‌های باستانی,عصر مفرغ,جنوب‌‌شرق}, url = {https://jscw.icrc.ac.ir/article_81714.html}, eprint = {https://jscw.icrc.ac.ir/article_81714_e74e31fe8caa9f0d377452a3b46f17fd.pdf} } @article { author = {Hosseinnezhad, Mozhgan}, title = {Review on Organic Dyes based on Indoline for Using Optoelectronic Devices}, journal = {Journal of Studies in Color World}, volume = {10}, number = {2}, pages = {73-85}, year = {2020}, publisher = {Institute for Color Science and Technology}, issn = {2251-7278}, eissn = {2383-2223}, doi = {}, abstract = {Phenothiazine is a butterfly shaped molecule based on indoline use as a starting material to synthesis organic dyes. These dyes have significant properties and performance in optoelectronic devices. Many optical and electrical properties such as photoluminescence, electroluminescence and electro-chemical properties can be modified by placing appropriate moiety on the parent phenothiazine group. In the last few decades, these electro- and photo-sensitive dyes have provided wide range of applications. This article presents the latest report on the development of small to medium sized phenothiazine-based dyes for dye sensitized solar cells, organic light emitting diodes, nonlinear optical materials, hole transporting components and sensors. For this end, an attempt structure properties and molecular design to improve these application and to test landscape perspective.}, keywords = {Phenothiazine,Dye,Dye-sensitized solar cells,Organic light emitting diode,Sensor}, title_fa = {مروری بر مواد رنگزای آلی بر پایه ایندولین برای استفاده در ابزارهای اپتوالکترونیک}, abstract_fa = {فنوتیازین یک مولکول پروانه‌ای شکل است که به عنوان ماده شروع‌کننده برای سنتز مواد رنگزای آلی برپایه ایندولین کاربرد دارد. این مواد رنگزا خواص و عملکرد چشمگیری در ابزارهای الکترونیکی دارند. بسیاری از ویژگی‌های نوری و الکتریکی مانند فوتولومینسانس، الکترولومینسانس و خواص الکتروشیمیایی، می‌تواند توسط قراردادن استخلاف‌های مناسب بر روی بدنه فنوتیازین بهینه شوند. در چند دهه گذشه، این مواد رنگزای حساس به الکتریسیته و نور، کاربردهای گسترده‌ای پیدا کرده‌اند. این مقاله آخرین تحقیقات در مورد توسعه مواد رنگزای آلی برپایه ایندولین با تمرکز بر روی فنوتیازین با اندازه مولکولی کوچک و متوسط برای کاربرد در سلول‌های خورشیدی حساس‌شده به مواد رنگزا، دیودهای نورتاب آلی، اپتیک غیرخطی، حامل­های حفره و حسگر را ارئه می‌دهد. به همین منظور تلاش شده است تا ارتباط خواص ساختاری و طراحی مولکول برای بهبود این کاربردها مورد ارزیابی قرار گیرد و چشم‌اندازها بررسی شود.}, keywords_fa = {فنوتیازین,مواد رنگزا,سلول خورشیدی حساس‌شده به مواد رنگزا,دیودهای نورتاب,حسگر}, url = {https://jscw.icrc.ac.ir/article_81691.html}, eprint = {https://jscw.icrc.ac.ir/article_81691_be54a8faa3bafcc74633aad9b9377195.pdf} }