@article { author = {}, title = {Article content}, journal = {Journal of Studies in Color World}, volume = {5}, number = {1}, pages = {0-0}, year = {2015}, publisher = {Institute for Color Science and Technology}, issn = {2251-7278}, eissn = {2383-2223}, doi = {}, abstract = {}, keywords = {}, title_fa = {فهرست}, abstract_fa = {}, keywords_fa = {}, url = {https://jscw.icrc.ac.ir/article_81524.html}, eprint = {https://jscw.icrc.ac.ir/article_81524_95b5dbb7c1952280228598888685656a.pdf} } @article { author = {Gholizadeh kalan, Samira and Tavanaie, Mohammad Ali and Esmaeilian, Nima and Hadizadeh, Mohsen}, title = {Camouflage of Textiles in Near Infrared Region: A Review}, journal = {Journal of Studies in Color World}, volume = {5}, number = {1}, pages = {3-18}, year = {2015}, publisher = {Institute for Color Science and Technology}, issn = {2251-7278}, eissn = {2383-2223}, doi = {}, abstract = {Night military operations are so difficult since the invention of infrared detection devices for wide range of the electromagnetic waves’ spectrum (specially in the invisible near infrared region (NIR)). Hence, camouflage textiles must be printed, solution dyed or mass dyed with appropriate dyes and/or pigments having NIR reflectance according to their applied environment. Colors existing in most camouflage patterns are green, brown, olive, khaki and black. So, reflectance values of pigments and/or dyes formulations must be color matched with the reflectance values of these colors in the NIR band. NIR camouflage studies conducted on natural and synthetic fibers have determined the role of pigments and dyes and their concentrations on the reflectance values and properties of textiles. Also they could show acceptable methods for production of the camouflage textiles and their uses in the invisible range of the electromagnetic waves’ spectrum. In this paper camouflage concepts and useful NIR camouflage dyes and pigments have been introduced, and then different methods of the textiles camouflage in NIR region have been reviewed.}, keywords = {Camouflage,Near infrared region,Textiles,Dyes,pigment}, title_fa = {مروری بر استتار منسوجات در ناحیه زیرقرمز نزدیک}, abstract_fa = {اختراع دستگاه‌های تشخیص امواج زیر قرمز در محدوده‌ وسیعی از طیف امواج الکترومغناطیس (به ویژه در ناحیه غیرمرئی زیر قرمز نزدیک) انجام عملیات نظامی در شب را بسیار مشکل ساخته است. به این منظور منسوجات استتاری باید با مواد رنگزا و رنگدانه‌هایی که دارای مقادیر انعکاسی در ناحیه زیر قرمز نزدیک، مشابه محیط اطراف می‌باشند، چاپ، رنگرزی یا رنگرزی جرمی شوند. رنگ‌هایی که در اغلب الگو‌های استتاری وجود دارد سبز، قهوه‌ای، زیتونی، خاکی و مشکی می‌باشد، بنابراین باید مقادیر انعکاسی حاصل از فرمولاسیون به‌کار گرفته شده در ترکیب مواد رنگزا و رنگدانه‌های مورد استفاده در منسوج مطابق با مقادیر انعکاسی شید‌های طبیعی آنها در ناحیه زیر قرمز نزدیک طیف امواج الکترومغناطیس باشد. مطالعات زیادی در خصوص استتار منسوجات در ناحیه زیر قرمز نزدیک بر روی الیاف مصنوعی و طبیعی انجام گرفته که در آنها نقش رنگدانه‌ها و مواد رنگزا و غلظت آنها بر خواص انعکاسی و ویژگی‌های منسوجات تعیین شده است. همچنین این مطالعات توانسته‌اند روش‌های مناسب تولید منسوجات استتاری و استفاده از آنها برای اهداف مورد نظر در ناحیه غیرمرئی طیف امواج الکترومغناطیس را نشان دهد. در این مقاله، پس از تعریف مفاهیم استتار و تشریح مواد‌رنگزا و رنگدانه‌های مناسب برای استتار منسوجات در ناحیه زیر قرمز نزدیک، روش‌های مختلف استتار منسوجات در ناحیه زیر قرمز، مرور گردیده است.}, keywords_fa = {استتار,ناحیه زیر قرمز,منسوجات,مواد رنگزا,رنگدانه‌}, url = {https://jscw.icrc.ac.ir/article_76381.html}, eprint = {https://jscw.icrc.ac.ir/article_76381_5d0452d5bab1a7ba888de00c5a47f074.pdf} } @article { author = {Sukhtesaraie, Alireza and Nouroozi, Elham and Shariati, Hamid}, title = {Management strategies to reduce Pollutants of Litographic printing}, journal = {Journal of Studies in Color World}, volume = {5}, number = {1}, pages = {19-29}, year = {2015}, publisher = {Institute for Color Science and Technology}, issn = {2251-7278}, eissn = {2383-2223}, doi = {}, abstract = {Industrial Pollutants has grown increasingly over the past few decades.Contaminants in the waste material, including solid, liquid and gas, which have chemical toxicity properties, explosive, corrosive to human health or the environment, either individually or when mixed with other wastes, they shall risk. Printing and packaging industries are industries that due to the presence of alcohols, detergents in large volumes can make the range of industrial pollutants. Governments and managers should take action to reduce emissions and Pollutants. This research discussed about the national and international laws and management strategies to reduce printing and packaging industrial pollution.}, keywords = {Environmental Problems,Solvents,Printing,Environmental impact reduction,Ink}, title_fa = {استراتژی های مدیریتی برای کاهش آلاینده ها در فرآیند چاپ لیتوگرافی}, abstract_fa = {میزان تولید آلاینده‌های صنعتی در طی چند دهه اخیر، رشد فزآینده‌ای داشته است. آلاینده‌ها به مواد زاید اعم از جامد، مایع و گاز که دارای فعالیت شیمیایی، سمیت، خاصیت انفجاری، خورندگی می‌باشند، اطلاق می‌شود. این مواد برای سلامت انسان یا محیط زیست، به صورت مجزا و یا هنگامی که با سایر مواد زاید مخلوط می‌شوند، ایجاد خطر می‌کنند. صنایع چاپ از جمله صنایعی خطرناک برای محیط زیست محسوب می‌شوند که به دلیل مصرف الکل‌ها، مرکب‌ها، پاک‌کننده‌ها، می‌توانند طیف وسیعی از آلاینده‌های صنعتی را تشکیل دهند. دولت‌ها و صاحبان صنایع برای کاهش آلاینده‌ها اقدامات و قوانینی را وضع کرده‌اند که این تحقیق به اقدامات ضروری از جمله به‌کارگیری مواد آب پایه، استفاده از مرکب‌های باز، ایجاد برج تقطیر، ایجاد شهرک‌های تخصصی چاپ، جداسازی پساب‌های صنعتی و غیره برای کاهش آلاینده‌های صنایع چاپ پرداخته است.}, keywords_fa = {مشکلات زیست محیطی,حلال‌ها,چاپ,کاهش اثرات زیست محیطی,مرکب}, url = {https://jscw.icrc.ac.ir/article_76382.html}, eprint = {https://jscw.icrc.ac.ir/article_76382_3c183ff1b1fa5fd1730e424e2c18cd2f.pdf} } @article { author = {Saeedi, Hosein and Gorji Kandi, Saeideh}, title = {A study on color of stars and color in Astronomy}, journal = {Journal of Studies in Color World}, volume = {5}, number = {1}, pages = {31-48}, year = {2015}, publisher = {Institute for Color Science and Technology}, issn = {2251-7278}, eissn = {2383-2223}, doi = {}, abstract = {Study of lights and colors is being considered as an important tool to know more about universe and the rules governing it. The aim of the present study is to review the human findings in this area and the scientific achievements of understanding and analysis of cosmos lights. The survey results show that nuclear reactions in the heart of stars as well as their resulting temperature are the most influential factors on the color of stars. So, the star magnitude, as the main indicator for star luminosity evaluation, is directly dependent to this temperature. On the other hand, factors such as the distance between Earth and the star and the light emitting surface area both affect our assessment of the star brightness. On the contrary, star temperature measurement could be implemented by using color characteristics of stars in addition to well-known spectroscopy methods. Star color index, defined as difference between star magnitude in two definite limits of light spectrum (in visible area and its nearby) and also color-color and color-magnitude diagrams can help astronomers to find out more regarding to star specifications like star temperature. The light is changed in its path toward earth, which affects the color of star. Inter stellar reddening, red shift and gravitational red shift are some of the most important changes of stars, and their analysis provides valuable information to the astrophysicists. Stars are not the only mass in this wide universe; the major part of the universe is contained of an invisible mass called dark matter which its essence is still unknown to scientists. Color of planets, considering planet as a light reflector mass, is a function of surface of planet, albedo and its characteristics and atmosphere. Analysis of color specification of planets leads to better understanding of planets, containing their structure and nature.}, keywords = {Color of stars,Red shift,Interstellar reddening,Color-color diagram,Color of planets}, title_fa = {بررسی رنگ در ستارگان و دانش نجوم}, abstract_fa = {بررسی نورها و رنگ‌ها، ابزاری مهم در راستای شناخت کیهان و درک قوانین حاکم بر آن به‌شمار می‌رود. هدف از این مطالعه، مروری بر یافته‌های بشر در این حوزه و دست‌آورد‌های علمی او در سایه‌ شناخت و تحلیل نورها و رنگ‌های کیهانی است. بررسی این دستاوردها نشان می‌دهد واکنش‌ها و فعل و ‌انفعالات هسته‌ای در قلب ستارگان و به‌تبع آن دمای آنها، موثرترین عامل در رنگ‌ ستارگان به‌شمار می‌رود، قدر ستاره، به‌عنوان معیار اصلی سنجش تابندگی آن، وابستگی مستقیم به این دما دارد. از سوی دیگر عواملی هم‌چون فاصله‌ ستاره تا زمین و وسعت سطح منتشرکننده‌ نور بر ارزیابی ما از درخشندگی ستارگان تأثیرگذارند. هم‌چنین به‌طور عکس، به‌منظور اندازه‌گیری دمای ستارگان، علاوه‌ بر روش‌های طیف‌سنجی می‌توان از ویژگی‌های رنگی آنها کمک گرفت. نمار رنگ ستاره که به‌صورت اختلاف قدر ستاره در دو محدوده‌ مشخص از طیف نور (در محدوده‌ نور مرئی و اطراف آن) تعریف می‌شود و هم‌چنین نمودارهای رنگ-رنگ و قدر-رنگ، ستاره‌شناسان را در راستای شناخت بیشتر ماهیت و ویژگی‌های ستارگان از جمله دمای آنها یاری می‌کند. نور در مسیرش به‌سمت زمین دست‌خوش تغییراتی خواهد شد که رنگ ستارگان را تحت تأثیر قرار می‌دهد. سرخ‌شوندگی میان‌ستاره‌ای، انتقال سرخ و انتقال سرخ گرانشی از جمله تغییراتِ مهم نور در طول مسیر به‌شمار می‌روند که تحلیل آن‌ها اطلاعات ارزشمندی را در اختیار اخترفیزیک‌دانان قرار می‌دهد. ستارگان تنها اجرام این دنیای پهناور نیستند، بخش اعظم کیهان را جرمی نادیدنی به‌نام ماده‌ تاریک شکل می‌دهد که چیستی آن هنوز بر دانشمندان مشخص نیست. رنگ سیارات به‌عنوان اجرام منعکس‌کننده‌ نور، تابعی از ضریب بازتاب، ماهیت و جو آنهاست. تحلیل ویژگی‌های رنگی سیارات زمینه‌ساز شناخت بیشتر مواد سازنده و ماهیت آنها به‌حساب می‌آید.}, keywords_fa = {رنگ ستارگان,انتقال سرخ,سرخ‌شوندگی میان‌ستاره‌ای‌,نمودار رنگ,رنگ,رنگ سیارات}, url = {https://jscw.icrc.ac.ir/article_76383.html}, eprint = {https://jscw.icrc.ac.ir/article_76383_edf89f79b1f11b6a413f45c368a773ae.pdf} } @article { author = {Yahyaie, Hossein and Ghaieni, Hamidreza}, title = {Impact resistance studying of polyurethane coatings}, journal = {Journal of Studies in Color World}, volume = {5}, number = {1}, pages = {49-59}, year = {2015}, publisher = {Institute for Color Science and Technology}, issn = {2251-7278}, eissn = {2383-2223}, doi = {}, abstract = {In the field of organic coatings mechanical properties is a crucial matter. For many applications, the choice of material depends upon a balance of stiffness, toughness, processability and price. However, to choose coating systems attending to mechanical properties is unavoidable. Impact resistance is one of the most important mechanical properties of organic coatings. Impact is a complicated phenomenon and critical condition to apply stress and many aspect of it are unknown. In this paper, impact resistance of polyurethane as one of the most useful coatings, has been studied. After discussion about behavior of organic coatings against impact and stress conditions, the method to improve impact resistance of polyurethane coatings will be presented. The results have been shown that the type of polyisocynate is very important and by replacement of Hexa Methylene Diisocynate by Isophorone Diisocyanate, impact resistance increase from 60 Kg cm to 70 Kg cm. Chain extender type, its functionality and its concentration are effective to enhance impact resistance. Using hyperbranch polymers and nanoparticle are another method to improve impact resistance of polyurethane coatings up to 100 Kg cm.}, keywords = {Organic coating,Impact resistance,Polyurethane,fracture,Mechanical properties}, title_fa = {مطالعه مقاومت به ضربه پوشش‌های پلی یورتان}, abstract_fa = {ستفاده از پوشش‌های آلی به منظور حفاظت از زیرآیند‌های مختلف امری متداول محسوب می‌شود که سبب پدیدار شدن کاربردهای گسترده پوشش‌ها در حوزه‌های مختلف شده است، زیرا می‌توان با استفاده از لایه‌ای نازک از سازه‌هایی با ارزش بالا حفاظت کرد. در این میان، خواص مکانیکی پوشش‌ها از اهمیت فوق‌العاده زیادی برخوردار است. زیرا پوشش با هر نوع کاربردی، اولین و مهم‌ترین ویژگی که باید داشته باشد پایداری در برابر شرایط مختلف محیطی است. بنابراین، در انتخاب پوشش‌ها توجه به خواص مکانیکی پوشش امری ضروری و اجتناب‌ناپذیر است. یکی از ویژگی‌هایی که در مورد پوشش‌ها از اهمیت فوق‌العاده زیادی برخوردار است، مقاومت پوشش در برابر ضربه است. از ضربه به عنوان یکی از حادترین شرایط اعمال نیرو به پوشش یاد می‌شود که موضوعی پیچیده بوده و ابعاد مختلفی از آن همچنان ناشناخته مانده است. در این گزارش به مطالعه مقاومت به ضربه یکی از پرکاربردترین پوشش‌های آلی یعنی پلی‌یورتان‌ها پرداخته شده است. بنابراین، پس از بیان رفتار پوشش‌های آلی در برابر ضربه و همچنین نوع تنش وارد شده به پوشش در هنگام اعمال ضربه به تحقیقات انجام گرفته در زمینه بهبود مقاومت به ضربه پوشش‌های یورتانی پرداخته خواهد شد. نتایج بررسی شده در این تحقیق نشان دادند که نوع ایزوسیانات در مقاومت به ضربه پوشش‌های پلی‌یورتانی موثر بوده و با تغییر نوع ایزوسیانات از هگزا متیلن دی ایزوسیانات به ایزوفورن دی ایزوسیانات مقاومت به ضربه از 60 به Kg cm 70 می‌رسد. نوع گسترش دهنده زنجیر، عاملیت آن و درصد وزنی مورد استفاده نیز بر مقاومت به ضربه موثر بوده، طوریکه می‌توان با استفاده از عامل گسترش‌دهنده الکلی سه عاملی به میزان 15% وزنی به مقاومت به ضربه Kg cm 95 دست یافت. استفاده از پلیمرهای شاخه‌ای و نانوذرات در پوشش‌های پلی‌یورتان، روش‌های دیگری هستند که سبب بهبود مقاومت به ضربه و افزایش آن تا Kg cm100 می‌شوند.}, keywords_fa = {پوشش آلی,مقاومت به ضربه,پلی‌یورتان,شکست,خواص مکانیکی}, url = {https://jscw.icrc.ac.ir/article_76384.html}, eprint = {https://jscw.icrc.ac.ir/article_76384_66f560967f10402083374360be77fa7f.pdf} } @article { author = {Ahmadi, Hamed and Safapour, Siyamak}, title = {A review on the UV-Protective finish of natural textiles using UV-absorbers}, journal = {Journal of Studies in Color World}, volume = {5}, number = {1}, pages = {61-74}, year = {2015}, publisher = {Institute for Color Science and Technology}, issn = {2251-7278}, eissn = {2383-2223}, doi = {}, abstract = {UV-absorbers were first used in sunscreens to protect human skin against harmful UV-rays by 1928. Since then, with awareness of different benefits of UV-absorbers, their usage was progressively increased and numerous researches have been performed to find out and extend their applications. In textile and hand-woven carpet industries, high energy UV-rays are very harmful for both fibers and dyed substrates since its energy degrades polymeric chains of fibers as well as dye structure and causes fiber properties loss, color fading, etc. Hence, numerous studies have explored the potential of UV-absorbers in light fatness enhancement of colored substrates and UV-protection of fibers. In this paper, UV-absorbers used for finishing of textiles are reviewed particularly with focus on the natural based products, i.e., natural fiber, natural dye, natural UV-absorber, etc. Overall, promising future is expected for identification and introduction of novel UV-absorber materials with desired performance.}, keywords = {UV-absorber,Natural textiles,Light degradation,UV-protective finish}, title_fa = {مروری بر روشهای تکمیل حفاظتی فرابنفش منسوجات طبیعی با استفاده از مواد جاذب فرابنفش}, abstract_fa = {برای اولین بار جاذب‌های فرابنفش در سال 1928 در ضدآفتاب‌ها برای محافظت پوست انسان در برابر اثرات مخرب اشعه فرابنفش استفاده شدند. با آگاهی از مزایای فراوان این مواد، توسعه آنها روند رو به رشدی داشته و تحقیقات زیادی در این زمینه انجام شده است. در صنایع نساجی و فرش دستباف، اشعه فرابنفش با انرژی زیاد یکی از عوامل مخرب اصلی در افت خواص الیاف و رنگ پریدگی منسوجات رنگی به دلیل شکستن زنجیرهای پلیمری و تخریب ساختارهای آلی می باشد. به همین جهت، مطالعات زیادی برای استفاده از جاذب‌های فرابنفش مختلف در عملیات تکمیل منسوجات جهت بهبود ثبات نوری منسوجات رنگی و محافظت الیاف انجام شده است. در این مقاله، پیشرفت های حاصله در استفاده از جاذب‌های فرابنفش تجاری با تاکید بر مواد قابل استفاده در تکمیل منسوجات برپایه طبیعی الیاف طبیعی، رنگزاهای طبیعی، مواد جاذب فرابنفش طبیعی و ... مرور شده است. بطورکلی و با توجه به نتایج و روند مطالعات، آینده روشنی برای شناسایی و معرفی مواد جاذب فرابنفش نوین با خواص مطلوب و دوستدار محیط زیست پیش بینی می گردد.}, keywords_fa = {جاذب فرابنفش,منسوجات طبیعی,تخریب نوری,تکمیل حفاظتی فرابنفش}, url = {https://jscw.icrc.ac.ir/article_76385.html}, eprint = {https://jscw.icrc.ac.ir/article_76385_236764f9818b70f71480fa6bb9df9df0.pdf} } @article { author = {Soleimani Gorgani, Atasheh and Pishvaei, Maliheh and Gorji Kandi, Saeideh and Najafi, Frhood and Yeke Fallah, Vahide}, title = {Organic Light-Emitting Diodes Preparation by Solution Process, Part I: Active Layers}, journal = {Journal of Studies in Color World}, volume = {5}, number = {1}, pages = {75-86}, year = {2015}, publisher = {Institute for Color Science and Technology}, issn = {2251-7278}, eissn = {2383-2223}, doi = {}, abstract = {Organic light emitting diodes (OLEDs) are as an electronic device that emit light in response to electric current. Typically, the structure of OLEDs includes a transparent conductive indium tin oxide (ITO) as an anode, a hole transporting layer (HTL), an emissive layer (EML), an electron transporting (ETL), and a metallic cathode. OLEDs can be potentially produced by low cost solution process, which is suitable for large size flexible displays. In recent years, many efforts have been done to produce the OLEDS by solution processable materials that resulted a way to achieve printable roll-to-roll organic optoelectronic devices. In order to have fully solution process, the used materials should be compatible with each other and not to damage or mix with each other. Therefore, the materials in a layer should be soluble in orthogonal solvents or cross-linkable that not mixes with other layers. The first part of this article described the hole transporting, electron transporting and active layers (HTL, EML, ETL) that able to coat by solution processing technologies such as ink- jet printing and spin coating. In the second part, this article talks over the materials, which used as anode and cathode in OLEDs by solution processe.}, keywords = {Organic light-emitting diodes,Light-emitting materials,Solution process,Hole transporting materials,Electron transporting materials}, title_fa = {تهیه دیود های نورتاب آلی به روش انحلالی، بخش اول: لایه های فعال}, abstract_fa = {دیودهای نورتاب آلی به عنوان یک ابزار الکترونیکی که در پاسخ به دریافت جریان الکتریسیته می‌توانند نور ساطع نمایند، معمولاً شامل یک لایه آند شفاف و رسانا ایندیم اکسید قلع، لایه انتقال/ تزریق حفره، لایه ساطع‌کننده نور، لایه انتقال/ تزریق الکترون و یک کاتد فلزی می‌باشند. یکی از مزایای اصلی دیودهای نورتاب آلی، قابلیت ساخت با روش انحلالی است که روشی کم هزینه و مناسب برای نمایشگرهای انعطاف‌پذیر اندازه بزرگ می‌باشد. در سال‌های اخیر تلاش‌های بسیاری در جهت توسعه مواد مورد استفاده به صورت انحلالی در این دستگاه‌ها صورت گرفته است. این تحقیقات منجر به موفقیت‌های قابل توجهی برای تولید تمام لایه‌های دیودهای نورتاب آلی به روش انحلالی گردیده و راه را برای رسیدن به تولید دستگاه‌های نوری آلی، با قابلیت چاپ لایه به لایه ایجاد کرده است. لازمه روش مذکور این است که مواد مورد استفاده در لایه‌ها با یکدیگر سازگاری داشته باشند، از این جهت که در معرض لایه‌های مجاور تخریب نشده و یا با آنان مخلوط نشوند. از این رو مواد هر لایه باید در حلال‌های متعامد قابل حل باشند و یا دارای قابلیت شبکه‌ای‌شدن باشند تا با یک دیگر مخلوط نشوند. در بخش اول این مقاله مروری می‌شود بر مواد ساطع‌کننده نور و مواد انتقال‌دهنده الکترون و حفره در دیودهای نورتاب آلی، که با روش انحلالی لایه به لایه از قبیل چاپگر جوهرافشان و پوشش دورانی قابلیت تولید دارند. در بخش دوم نیز به مواد مورد استفاده به عنوان آند و کاتد با قابلیت استفاده با روش انحلالی پرداخته می‌شود.}, keywords_fa = {دیودهای نورتاب آلی,مواد ساطع‌کننده نور,روش انحلالی,مواد انتقال‌دهنده حفره,مواد انتقال‌دهنده الکترون}, url = {https://jscw.icrc.ac.ir/article_76386.html}, eprint = {https://jscw.icrc.ac.ir/article_76386_c7bc55a0679926e3b7c609ca8f3fd0d1.pdf} } @article { author = {Soleimani Gorgani, Atasheh and Pishvaei, Maliheh and Gorji Kandi, Saeideh and Najafi, Frhood and Yeke Fallah, Vahide}, title = {Organic Light-Emitting Diodes Preparation by Solution Process, Part II: Electrodes}, journal = {Journal of Studies in Color World}, volume = {5}, number = {1}, pages = {87-96}, year = {2015}, publisher = {Institute for Color Science and Technology}, issn = {2251-7278}, eissn = {2383-2223}, doi = {}, abstract = {In recent years the organic light-emitting diodes (OLEDs) as smart electronic devices have been successfully developed. Typically, the structure of OLEDs includes an indium tin oxide (ITO) transparent conductive anode, a hole transporting layer (HTL), an emissive layer (EML), an electron transporting layer (ETL), and a metallic cathode. Solution process is more appropriate than other technologies such as vacuum deposition for producing flexible displays. Many efforts have been devoted in the developing the solution processable materials, which have resulted a way to achieve printable roll-to-roll organic optoelectronic devices. The first part of this article described the hole transporting, electron transporting and active layers (HTL, EML, ETL) that able to coat by solution processing technologies such as ink- jet printing and spin coating. Since the anode and cathode layers in conventional OLEDs are produced by non-solution process; therefore, making electrodes are a major challenge in achieving fully solution process. Hence, the second part of this paper discussed about the soluble materials, which used as the anode and cathode in OLED by solution processes}, keywords = {Organic light-emitting diodes,Electrode,Solution process,ITO,Ink- jet printing}, title_fa = {تهیه دیود های نورتاب آلی به روش انحلالی، بخش دوم: الکترودها}, abstract_fa = {دیودهای نورتاب آلی یکی از انواع ابزار الکترونیکی هوشمند هستند که در سال‌های اخیر از مرزهای دانش عبور کرده و وارد بازار تجاری شده‌اند. به طور معمول دیودهای نورتاب آلی، شامل یک لایه آند رسانا و شفاف ایندیم تین اکساید، لایه انتقال/ تزریق حفره (HTL)، لایه ساطع‌کننده نور (EML) و یک لایه انتقال/ تزریق الکترون (ETL) و یک کاتد فلزی می‌باشند. فرآیند انحلالی در تهیه نمایشگرهای انعطاف‌پذیر مناسب‌تر از فناوری‌های دیگر مانند لایه نشانی تحت خلا می‌باشد. تاکنون مواد بسیاری با قابلیت استفاده در فرآیند انحلالی توسعه پیدا کرده و راه را برای ساخت دستگاه‌های الکترونیک نوری آلی با چاپ لایه به لایه، فراهم کرده‌اند. در بخش اول این مقاله به بررسی لایه‌های فعال(لایه انتقال/تزریق حفره، لایه ساطع‌کننده نور و یک لایه انتقال/تزریق الکترون) در دیودهای نورتاب آلی پرداخته شد. از آنجا که لایه آند وکاتد در دیودهای نورتاب متداول، به روش‌های غیر انحلالی تهیه می‌شوند، یک چالش عمده در تحقق کامل روش انحلالی دیودهای نورتاب آلی، الکترودها هستند. از این رو در بخش دوم این مقاله به مواد مورد استفاده به عنوان آند و کاتد در دیودهای نورتاب آلی، که با روش انحلالی تهیه می‌گردند، پرداخته می‌شود.}, keywords_fa = {دیودهای نورتاب آلی,الکترود,روش انحلالی,ایندیم تین اکساید,چاپگر جوهرافشان}, url = {https://jscw.icrc.ac.ir/article_76387.html}, eprint = {https://jscw.icrc.ac.ir/article_76387_12af875712d31ecd1d31d4d426f4276a.pdf} } @article { author = {Pirisedigh, Azade and Seyedjamali, Hojat}, title = {Synthesis and Application of Self Colored Polymers}, journal = {Journal of Studies in Color World}, volume = {5}, number = {1}, pages = {97-108}, year = {2015}, publisher = {Institute for Color Science and Technology}, issn = {2251-7278}, eissn = {2383-2223}, doi = {}, abstract = {Colored functionalized polymers are one the most important material in medical imaging, signal amplification in biological diagnosis, photochromic materials and fluorescent dynamics studies of polymers. Often, wrapping the very limited number of dye molecules and certain exactly clear their situation in the polymer chain, such as the end of the chain or at the junction of two different segments of the copolymer, is very important. The development of a living polymerization methods / controlled functionalized polymerization In the aforementioned areas, as well as polymer molecular weight control is possible. This article discusses on practical ways for single dye molecule attachment to the polymer chain. Dye molecules can attached to the polymer chains in each of the polymerization process, including initiation, propagation, or after the polymerization of the primers by an initiator, functionalized monomer or functionalization of obtained polymer with dye molecule.}, keywords = {Polymerization,Self-colored polymer,Colored substitution,Fluorescence}, title_fa = {سنتز و کاربرد پلیمرهای خودرنگ}, abstract_fa = {پلیمرهای دارای استخلافهای رنگی از جمله مواد مهم در تصویر برداری‌های پزشکی، تقویت سیگنال در تشخیص‌های بیولوژیکی، مواد فوتوکرومیک و مطالعه فلوروسنتی دینامیک پلیمرها هستند. اغلب، قرار گرفتن تعداد بسیار محدود و دقیقاً معینی از مولکول رنگ در محلی کاملاً مشخص از زنجیره پلیمری مانند انتهای زنجیر یا در محل اتصال دو قطعه مختلف در کوپلیمرها، اهمیت بسیار زیادی دارد. با توسعه یافتن روش‌های پلیمریزاسیون زنده/کنترل شده، عامل‌دار کردن پلیمر در نواحی مذکور و همچنین کنترل وزن مولکولی پلیمر، امکان پذیر است. این مقاله به بررسی روشهای عملی که به متصل شدن تنها یک مولکول رنگ به هر زنجیر پلیمری منتهی می‌شود، می‌پردازد. مولکول رنگ می‌تواند در هر کدام از مراحل پلیمریزاسیون شامل مرحله آغاز، انتشار و یا پس از خاتمه پلیمریزاسیون به زنجیر پلیمر متصل گردد که به ترتیب بوسیله آغازگرها، یک مونومر عامل دار شده و یا عامل‌دار کردن پلیمر بدست آمده با مولکول رنگ، انجام می‌شود.}, keywords_fa = {پلیمریزاسیون,پلیمر خود رنگ,استخلاف رنگی,فلورسنس}, url = {https://jscw.icrc.ac.ir/article_76388.html}, eprint = {https://jscw.icrc.ac.ir/article_76388_58fb46137a97e34f89aff54becdabfce.pdf} } @article { author = {}, title = {Letter words}, journal = {Journal of Studies in Color World}, volume = {5}, number = {1}, pages = {109-110}, year = {2015}, publisher = {Institute for Color Science and Technology}, issn = {2251-7278}, eissn = {2383-2223}, doi = {}, abstract = {}, keywords = {}, title_fa = {واژه‌‌نامه}, abstract_fa = {}, keywords_fa = {}, url = {https://jscw.icrc.ac.ir/article_81525.html}, eprint = {https://jscw.icrc.ac.ir/article_81525_d891517104d632e08abdc00c0448ed77.pdf} }