per
پژوهشگاه رنگ با همکاری انجمن علمی رنگ ایران
مطالعات در دنیای رنگ
2251-7278
2383-2223
2019-08-23
9
2
0
0
81634
Review paper
فهرست
Article content
https://jscw.icrc.ac.ir/article_81634_2cf3049723008f98d4a4cc2ca0fbaf78.pdf
per
پژوهشگاه رنگ با همکاری انجمن علمی رنگ ایران
مطالعات در دنیای رنگ
2251-7278
2383-2223
2019-08-23
9
2
1
8
81571
Review paper
مطالعه روشهای تخریب مواد رنگزای آلی توسط نانو ذرات فوتوکاتالیستی با بهرهگیری از خاصیت پلاسمونیک
The Study of Methods for the Degradation of Organic Dyes by Photocatalytic Nanoparticles Using Plasmonic Property
سیده حدیث مرتضوی میلانی
hadis.milani@aut.ac.ir
1
علی اصغر صباغ الوانی
sabbagh_alvani@aut.ac.ir
2
رضا سلیمی
r-salimi@aut.ac.ir
3
حسن سامعی
h-sameie@aut.ac.ir
4
دانشجوی کارشناسی ارشد، الف) دانشکده مهندسی پلیمر و رنگ، دانشگاه صنعتی امیرکبیر، ب) پژوهشکده رنگ و پلیمر، دانشگاه صنعتی امیرکبیر
دانشیار، پژوهشکده رنگ و پلیمر، دانشگاه صنعتی امیرکبیر
استاد پژوهشگر، پژوهشکده رنگ و پلیمر، دانشگاه صنعتی امیرکبیر
استاد پژوهشگر، پژوهشکده رنگ و پلیمر، دانشگاه صنعتی امیرکبیر
آلودگیهای آبی، افزایش جمعیت و تقاضای روز افزون منبع آب پاک، بشر را به تصفیه آب و استفاده مجدد از آن واداشته است. بنابراین تلاش برای بهبود روشهای تصفیه پساب و تجزیه ترکیبات سمی به ترکیبات غیرسمی همواره مورد توجه بوده است. در این میان استفاده از کاتالیزورهای نوری، به علت اکسایش و تخریب سریع آلایندهها نسبت به روشهای سنتی، به عنوان روشی کم هزینه، دوستدار محیطزیست و کارآمد شناخته میشود. کاتالیزورهای نوری نیمهرساناهایی هستند که با جذب نور، الکترون و حفره را ایجاد میکنند که پس از واکنش با آب و اکسیژن و تولید گونههای رادیکالی مانند سوپراکسیدها و غیره سبب تخریب ترکیبات آلی آلاینده میشود. تاثیر نانو ساختارهای فلزی با خاصیت پلاسمونیک بر افزایش دامنه جذب نور نیمههادیها اثبات شده است. رزونانس پلاسمون سطحی در نانو ساختارهای فلزی در برابر نور موجب ایجاد انرژی پلاسمونیک میشود که این انرژی در فلز با سه سازوکار اصلی به نیمههادی منتقل میشود: انتشار نور، انتقال انرژی رزونانس القا شده توسط پلاسمون (PIRET)و تزریق الکترون داغ که پژوهشهای متعددی نشان داده این عوامل موجب افزایش بازده فوتوکاتالیستی در تخریب ماده رنگزا میشوند.
Water pollution, population growth and the increasing demand for clean water have led humans to water treatment and reuse. Therefore, efforts to improve wastewater treatment techniques and the degradation of toxic compounds into non-toxic compounds have always been considered. photocatalysts, due to rapid oxidation and degradation of pollutants than traditional methods, as known as low-cost, environmental friendly and efficient method. Photocatalysts are semiconductors that absorb light then generate electrons and holes, which after reacting with water and oxygen, and producing radical species such as superoxide, etc., cause the degradation of organic compounds.The metallic nano-structures with plasmonic effect has an influence on increasing the light absorption amplitude of semiconductors. Surface plasmon resonance in metallic nano-structures against light generates plasmonic energy, which is transmitted to the semiconductor by three main mechanisms: light scattering, PIRET-induced resonance energy transfer and hot electron injection, which researches indicate that these factors increase photocatalytic efficiency in dye degradation.
https://jscw.icrc.ac.ir/article_81571_6968735f669423e4c42eb20a7c5795ee.pdf
کاتالیزور نوری
نانوذرات نقره
خاصیت پلاسمونیک
رزونانس پلاسمون سطحی
تخریب ماده رنگزا
غشا پلیمری
photocatalyst
Silver nanoparticles
Plasmonic effect
Surface plasmon resonance
dye degradation
Polymeric Membrane
per
پژوهشگاه رنگ با همکاری انجمن علمی رنگ ایران
مطالعات در دنیای رنگ
2251-7278
2383-2223
2019-08-23
9
2
9
21
81606
Review paper
کاربرد فتوکاتالیستها و عوامل موثر بر آنها در تصفیه پسابهای رنگی
Application of Photocatalysts and Their Effective Parameters in the Treatment of Colored Wastewaters
مرضیه قائمی زاده
ghaemi62@gmail.com
1
محمد خواجه مهریزی
mkhajeh@yazd.ac.ir
2
دانشجوی دکتری، دانشکده مهندسی نساجی، دانشگاه یزد
دانشیار، دانشکده مهندسی نساجی، دانشگاه یزد
در سالهای اخیر به دلیل کاهش منابع آب شیرین، تصفیه پساب توجه زیادی را به خود جلب کرده است. وجود یونهای فلزی، ماده رنگزا و مواد شیمیایی در پسابهای صنعتی باعث مزاحمت فعالیتهای زیستی در آبها شده است. مواد رنگزا ترکیباتی با ساختار پیچیده، معمولا سمی و مقاوم به تجزیه زیستی هستند که از طریق فاضلابهای صنعتی وارد محیطزیست میشوند. پژوهشهای زیادی برای پیدا کردن راهی به منظور حذف مواد رنگزا از پساب صورت گرفته است. تحقیق و توسعه در این زمینه موجب ایجاد فرآیندی به نام فرآیندهای اکسایش پیشرفته، به ویژه از طریق فوتوکاتالیز ناهمگن است که انرژی فوتون را به انرژی شیمیایی تبدیل میکند. فتوکاتالیستها آن دسته از کاتالیزورها هستند که با تابش نور فعال شده و آلایندههای موجود در هوا یا آب را به مواد کم ضرر مانند آب و دیاکسیدکربن تبدیل میکنند. این تحقیق، خلاصهای از فعالیتهای انجام شده در زمینه حذف مواد رنگزا صنعتی با استفاده از نانوذرات فتوکاتالیستی میباشد. به علاوه، تاثیر عواملی همچون دما، pH و زمان واکنش نیز به عنوان عوامل موثر در فرآیند تصفیه بررسی شده است.
In recent years, due to the reduction of freshwater resources, wastewater treatment has attracted a lot of attention. The presence of metal ions, dyes and chemicals in industrial wastewaters has caused disturbances in biological activities in the water. Dyes are compounds with a complex structure, usually toxic and resistant to biological degradation, which enters the environment by industrial wastewater. A lot of research has been done to find a way to remove dyes from wastewater. Research and development in this field have created a new process called advanced oxidation processes, particularly in the form of heterogeneous photocatalysis that converts photon energy into chemical energy. The photocatalyst is a catalyst that is activated by light radiation and converts pollutants in air or water into materials such as water and carbon dioxide. This research is a summary of the applied studies on dye removal using photocatalytic nanoparticles. Additionally, the effects of the fundamental parameters such as temperature, pH, and reaction time have also been reviewed.
https://jscw.icrc.ac.ir/article_81606_b0ac240945af2a85f6d3d11f3fa91e57.pdf
فتوکاتالیست
نانوذرات
تصفیه
رنگبری
پساب رنگی
Photocatalysts
Nanomaterials
treatment
Decolorization
colored wastewater
per
پژوهشگاه رنگ با همکاری انجمن علمی رنگ ایران
مطالعات در دنیای رنگ
2251-7278
2383-2223
2019-08-23
9
2
21
29
81607
Review paper
مروری بر روشهای بهبود نانولولههای TiO2 برای استفاده در تجزیه فوتوکاتالیستی مواد رنگزا
Review on Modification Methods of TiO2 Nanotubes for Photocatalytic Degradation of Dyes
مهری مقصودی
maghsoudi.mehri@yahoo.com
1
شاهین خامنه اضل
khameneh@tabrizu.ac.ir
2
دانشجوی کارشناسی ارشد، گروه مهندسی مواد، دانشگاه تبریز
دانشیار، گروه مهندسی مواد، دانشگاه تبریز
سالانه مواد رنگزا زیست تجزیهناپذیر موجود در صنایع نساجی، چرم، کاغذ، غذایی، سلهای فوتوالکتروشیمیایی به جریانات طبیعی آب تخلیه میشود. آرایههای نانولولهای بسیار منظم TiO2 تهیه شده با آندایزینگ تیتانیم، بهدلیل سطح ویژه بزرگ، توانایی اکسیدکنندگی قوی و عملکرد عالی انتقال بار، در سالهای اخیر به طور گسترده به عنوان فوتوکاتالیست برای تجزیه مواد رنگزا به کار میرود. با این وجود، معایب TiO2 گاف انرژی وسیع (eV 2/3-3) و نرخ بالای بازترکیب الکترون- حفره حاصل از نور است که کاربرد نانولولههای TiO2 را در استفاده از نور مرئی برای تجزیه آلودگیهای آلی محدود میکند. به این منظور در سالهای اخیر تلاشهای بسیاری برای اصلاح نانولولههای TiO2، برای افزایش جذب نور تا محدوده نور مرئی، محدود نمودن گاف انرژی، افزایش مساحت سطح و جلوگیری از بازترکیب حاملهای بار، صورت گرفته است. برای غلبه بر این محدودیتها و افزایش فعالیت فوتوکاتالیستی نانولولهها روشهای مختلفی بررسی شده است که عبارتند از: آرایش با ذرات فلزات نجیب، آلایش با عناصر فلزی، اصلاح با نیمهرسانا و آلایش با عناصر غیرفلزی.
Annually, insoluble biodegradable dyes in textile, leather, paper and food industries, photovoltaic cells are evacuated to natural water flows. The highly ordered TiO2 nanotube arrays made with titanium anodizing, due to its large surface area, strong oxidizing ability and excellent charge transfer performance, have been widely used as photocatalyst for decomposition of dyes in recent years. Nevertheless, the disadvantages of TiO2 are the vast energy gap (3.0-3.2 eV) and the high recombination of electron-hole derived from light that limits the use of TiO2 nanotubes in the use of visible light to decompose organic pollutants. For this purpose, in recent years, many attempts have been made to modify TiO2 nanotubes to increase light absorption to visible light, limit the band gap, increase surface area, and prevent the recombination of charge carriers. To overcome these limitations and increase photocatalytic activity of nanotubes, various methods have been investigated: decoration with noble metal particles, doping with metal elements, modification with semiconductor and doping with non-metallic elements.
https://jscw.icrc.ac.ir/article_81607_0e328c9fec62c6b10ac2663b9b4f346e.pdf
دی اکسید تیتانیم
نانولوله
اصلاح
فوتوکاتالیستی
حذف مواد رنگزا
TiO2
nanotube
Modification
Photocatalytic
dye degradation
per
پژوهشگاه رنگ با همکاری انجمن علمی رنگ ایران
مطالعات در دنیای رنگ
2251-7278
2383-2223
2019-08-23
9
2
31
42
81619
Review paper
مروری بر انواع هدهای چاپگر جوهرافشان پیزوالکتریک
A Review of Piezoelectric Ink-Jet Printing Heads
آتشه سلیمانی گرگانی
asoleimani@icrc.ac.ir
1
دانشیار، گروه پژوهشی علوم و فناوری چاپ، پژوهشگاه رنگ
چاپ جوهرافشان از انواع چاپهای غیرتماسی است. در فناوری جوهرافشان، جریانی از قطرات جوهر به صورت دیجیتالی و کنترل شده از نازلهای کوچک موجود در هد چاپگر روی زیرآیند مورد نظر جهت ایجاد تصویر، پاشش میشود. این قطرات جوهر توسط ضربه فشاری که در هد چاپگر ایجاد می شود از نازلها خارج میشوند. روشهای مختلفی برای ایجاد ضربه فشاری وجود دارد که بر این اساس میتوان هد چاپگرهای جوهرافشان را به گروههای مختلف دستهبندی کرد. هدهای چاپگرهای جوهرافشان از نظر ساختار نازلها مانند تعداد، جنس، اندازه و شکل نازلها، توانایی چاپ نوع جوهر، اندازه و شکل قطره جوهر، عرض چاپ، وضوح تصویر و دوام با هم متفاوت میباشند. به همین علت انتخاب چاپگر در بعضی از مواقع محقق یا صنعتگر را با مشکل روبرو میکند. لذا در این مقاله به تفصیل، انواع هدهای چاپگرجوهر افشان همراه با خصوصیات ساختاری آنها در جهت هدایت مصرفکننده بحث میگردد. همچنین شرکتهای تجاری تولیدکننده انواع مختلف هدهای چاپگر در جهت عرضه در صنایع مختلف مانند کاغذ، نساجی، سرامیک و الکترونیک معرفی میگردد.
Ink-jet printing is a non-contact printing method. In this technology, the drops of ink are jetted digitally through a small nozzle onto the specific substrate to produce an image. The ink drop formation is initiated via a pressure pulse applied from the head of the printer to the nozzle. Depending on the way of creating the pressure pulse, the ink-jet printing heads are divided into different classes. These various classes of ink-jet printing head differ in term of the structure of the nozzle such as numbers, material, size and shape, printability of ink, droplet size and shape, print wide, resolution and durability. Therefore, in some cases, the choice of the exact printer is difficult for a researcher or customer. This paper reports different types of ink-jet printing heads within their characterization to giddiness user. Also, it introduces various manufacturers who produce a diverse class of head to use in different application such as paper, textile, ceramic and electronic.
https://jscw.icrc.ac.ir/article_81619_3463d60e07d9eecfa63cad2fd1f11fc7.pdf
چاپگرهای جوهرافشان
هد چاپگر
پیزوالکتریک
مرکب
Ink-jet printer
Printer head
Piezoelectric
Ink
per
پژوهشگاه رنگ با همکاری انجمن علمی رنگ ایران
مطالعات در دنیای رنگ
2251-7278
2383-2223
2019-08-23
9
2
43
52
81621
Review paper
رنگ در ارسن شهری زندیه شیراز
Color in Arsen Zandieh Shiraz
فرهاد عوض نژاد
avaznejad.tvu@gmail.com
1
حمید رضا شیبانی
2
استادیار، گروه معماری و شهرسازی، دانشکده فنی و حرفهای شهید باهنر شیراز
مدرس گروه معماری و شهرسازی دانشگاه فنی و حرفهای استان فارس، عضو هیات موسس آتلیه طراحی جهاننما، پارک علم و فناوری استان فارس
با نگاهی گذرا به نظام سنتی شهرهای ایران و سلسله مراتب خاص موجود در آنها، شاید بتوان ادعا کرد که در فرهنگ آنها، تجلی روح ساکنان و سازگار با طبیعت پیرامون خود قابل مشاهده است. نحوه حضور رنگها در فضا و توجه به اینکه به کارگیری رنگها با چه هدفی دنبال میشود، بسیار حائز اهمیت است. امروزه با توجه به روند ساخت و سازهای در حال انجام، شاهد کمرنگشدن هویت رنگی شهرها هستیم و این مسئلهای است که نیاز به بررسی دارد. هدف و تمرکز پژوهش حاضر بر رنگ، ترکیبهای رنگی، ارتباط معنایی موجود میان رنگها و نقش این هماهنگی در پدیدآوردن منظر شهری یکپارچه برای شهرهای ایرانی-اسلامی است. ارسن شهری زندیه شیراز نمونه کوچکی از منظر شهری ایرانی اسلامی است که نقش و تاثیر رنگ دراین مجموعه بررسی شده است. روش تحقیق این نوشتار، توصیفی-تحلیلی است. برای تدوین چارچوب نظری پژوهش، از مطالعات کتابخانهای و برای تحلیل رنگهای به کارفته در این مجموعه از برداشتهای میدانی و روش لانکلو استفاده شده است. یافتههای پژوهش نشان می دهد که در آفرینش فضای شهری بی نظیری همچون مجموعه زندیه شیراز، به رنگ به عنوان عنصری مهم، نگاهی ویژه شده است. در هنر و معماری این مجموعه از رنگهای سازگار با اقلیم و هویت بومی، استفاده شده است. همچنین استفاده زیاد از رنگ برای افزایش غنای حسی و چشمی این مکان دیده میشود. بررسی و تحلیل فضاهای شهری برجای مانده از شهر سنتی دیروز و قواعد و قوانین حاکم بر آن میتواند مرجع و پاسخگو باشد.
Stating the issue with a quick look at the traditional system of Iranian cities and the specific hierarchy existing in them, it may be claimed that in their culture, the manifestation of the spirit of the residents and compatible with their surrounding nature is visible. It’s very important to know how the presence of colors are used in space and for what purpose colors are used. Nowadays, due to the ongoing construction process, we are witnessing a diminution identity of the cities and this is a matter that needs to be checked. The aim and focuse of the present study on color, color combinations, semantic relation between colors and the role of this coordination in creating perspective Integrated to the urban cities in the Iranian-Islamic cities, Arsan Shahri Zandieh Shiraz is a small sample of Iranian urban perspective that the role and impact of color in this collection has been reviewed.The research method of this paper is descriptive-analytical. To formulate a theoretical framework of the research, library studies and to analyze the colors used in this collection of field observations, the method of Hey Baang and the method of Langlo has been used. The findings of the research show that the creation of a unique urban space such as the Zand to Shiraz, color as an element importantly, a special look has been made. In the arts and architecture of this collection of color-compatible climates and indigenous identities are used. Also, maximum use of color to increase the sensory and visual of this place can be seen. The study and analysis of urban spaces left over from the traditional city in the incidence and the rules and rules governing it can be reference and responsive.
https://jscw.icrc.ac.ir/article_81621_bbcd71e80926aa9b79c9a6f14f30803d.pdf
ارسن شهری
لانکلو
رنگ
پالت رنگی
ارسن زندیه شیراز
Arsan city
Lenclos
Color
Color of the palette
Arsen Zandieh Shiraz
per
پژوهشگاه رنگ با همکاری انجمن علمی رنگ ایران
مطالعات در دنیای رنگ
2251-7278
2383-2223
2019-08-23
9
2
53
64
81620
Review paper
تولید تونر چاپگرهای لیزر جت به روش پلیمریزاسیون امولسیونی درجا
Production of Laser Jet Printer Toner by in Situ Emulsion Polymerization Method
بهاره بابایى
bahareh.babaei72@gmail.com
1
محسن نجفی
najafi.m@qut.ac.ir
2
مریم عطایی فرد
ataeefard-m@icrc.ac.ir
3
دانشجوی کارشناسی ارشد، گروه مهندسی پلیمر، دانشگاه صنعتی قم
استادیار، گروه مهندسی پلیمر، دانشگاه صنعتی قم
دانشیار، گروه پژوهشی علوم و فناوری چاپ، پژوهشگاه رنگ
از گذشته تا به امروز روشهای مختلفی از چاپ برحسب کاربرد مورد استفاده قرار گرفتهاند که ازجمله پرکاربردترین این روشها میتوان روش چاپ الکتروفتوگرافی را نام برد. تقاضای روزافزون این روش چاپ اهمیت دستیابی به تصاویر مطلوب با وضوح بالا را در الکتروفتوگرافی افزایش میدهد. ازاینرو فرآیند و موادی که در آن مورد استفاده قرار میگیرند پیوسته در حال بهبود و پیشرفت هستند. در این مقاله در ابتدا تونر و اجزاسازنده آن معرفی، سپس ویژگیهای تأثیرگذار بر کیفیت تونر بیان شده است. در ادامه روشهای مختلف تولید تونر، بهطورخاص تولید تونر به روش پلیمریزاسیون امولسیونی مورد بررسی قرار گرفته است. روش پلیمریزاسیون امولسیونی به دلیل قابلیت ایجاد کامپوزیتی با ساختار کپسول شده و ذرات کروی و همچنین درصد تبدیل بالای واکنش میتواند در تولید تونر بسیار مورد توجه قرار گیرد. در این راستا، ضمن معرفی و بررسی تأثیر عوامل مختلف این روش بر خواص تونر به دست آمده، مزایای آن نسبت به سایر روشهای تولید تونر تشریح میگردد.
From the past to the present day, various methods of printing have been used in terms of application, among which the most widely used method of them is electrophotography. The increasing demand for this technique increases the importance of obtaining high-resolution images in electrophotography. Therefore, the processes and the materials that are used are continuously improving and progressing. In this paper, at the first the toner and its components are introduced, then the properties of toner that effect on its quality is expressed. Followed by, different methods of toner production, especially the in situ emulsion polymerization method are described. The emulsion polymerization can be of great interest in toner production because of its ability to form composite particles with encapsulated structure and spherical shape as well as high reaction conversion. In this regard, different effective parameters and components of this method to produce of toner are introduced. Finally, the benefits of this method are expressed in comparison to other production methods of toner.
https://jscw.icrc.ac.ir/article_81620_9f1e9ab4fe4af452458d9560c92a0b01.pdf
تونر
چاپگر لیزرجت
پلیمریزاسیون امولسیونی
کپسولسازی
Toner
Laser jet printer
Emulsion polymerization
Encapsulation
per
پژوهشگاه رنگ با همکاری انجمن علمی رنگ ایران
مطالعات در دنیای رنگ
2251-7278
2383-2223
2019-08-23
9
2
65
66
81635
واژگان
Key words
https://jscw.icrc.ac.ir/article_81635_4f102cf967517fcdf9c4c036723e3cee.pdf