@article { author = {Gholamiyan, Hadi and gholampoor, behnam}, title = {Identify the mechanism of Adhesion wood coatings and coating penetration assessment techniques}, journal = {Journal of Studies in Color World}, volume = {10}, number = {3}, pages = {1-12}, year = {2020}, publisher = {Institute for Color Science and Technology}, issn = {2251-7278}, eissn = {2383-2223}, doi = {}, abstract = {In this study, the mechanism of penetration of various coatings on wood texture was investigated. Based on the results of microscopic studies, the penetration of the coating into the texture of soft and hard wood has been different. Among the factors affecting the penetration rate, the effect of anatomical structure is more important than other factors. In this study, wood cells were examined from an anatomical point of view and then, the mechanisms of coating penetration into wood tissue were investigated.In general, understanding the anatomical structure of wood and the characteristics of the coating has greatly contributed to the improvement of wood coating methods.The results showed that the preparation of the substrate surface such as grating and sanding causes changes in the penetration of the coating in the wood texture.Also, sanding causes the cell to deform and clog pores, or even completely prevent the coating from penetrating.The coating penetrates the wood tissue inside the vessel, wood rays and punctuation. Water-based coatings have been able to have more penetration than solvent-based coatings in wood. In addition, wood with a rough surface absorbs more of the coating and improves performance in absorbing pigments.}, keywords = {surface energy,Adhesion,Permeability,Viscosity,microscope}, title_fa = {شناسایی ساز و کار چسبندگی پوشش های چوب و تکنیک های ارزیابی نفوذ پوشش}, abstract_fa = {در این مطالعه سازوکار نفوذ پوشش‌‌های مختلف به بافت چوب مورد بررسی قرار گرفته است. بر اساس نتایج پژوهش‌‌های انجام شده در زمینه بررسی‌‌های میکروسکوپی، میزان نفوذ پوشش به بافت چوب سوزنی‌‌برگان و پهن‌‌برگان متفاوت بوده است. در میان عوامل موثر بر میزان نفوذ، تاثیر ساختار آناتومی از اهمیت بالاتری نسبت به سایر عوامل برخوردار می‌‌باشد. در این مطالعه، ابتدا سلول‌‌های چوبی از دیدگاه آناتومی مورد بررسی قرار گرفت و سپس، سازوکار‌‌های نفوذ پوشش به بافت چوب بررسی شد. به طور کلی، شناخت ساختار آناتومی چوب و ویژگی های پوشش، کمک شایانی به بهبود روش‌های پوشش‌دهی چوب کرده است. نتایج نشان داد، آماده‌‌سازی سطح زیرین پوشش نظیر رنده‌‌کاری و سنباده‌‌زنی سبب ایجاد تغییرات نفوذ پوشش در بافت چوب می‌‌شود. همچنین، سنباده‌‌زنی باعث تغییر شکل سلول و مسدود‌شدن منافذ شده و یا حتی کاملا از نفوذ پوشش جلوگیری می‌‌کند. محل نفوذ پوشش در بافت چوب در داخل حفرات آوندی و منافذ می‌‌باشد. پوشش‌های پایه آب توانسته‌‌اند نفوذ بیشتری نسبت به پوشش‌‌های پایه حلال در چوب داشته باشند. به‌علاوه، وسایل چوبی دارای سطح زبر، جذب بیشتری از پوشش را دارد و باعث بهبود عملکرد در جذب مواد رنگی می‌‌شود.}, keywords_fa = {انرژی سطحی,چسبندگی,نفوذپذیری,گرانروی,میکروسکوپ}, url = {https://jscw.icrc.ac.ir/article_81720.html}, eprint = {https://jscw.icrc.ac.ir/article_81720_8230ad6e72222d3fd1f6f5da6e9b874f.pdf} } @article { author = {Eftekhari, Behrouz and Pishvaei, Malihe}, title = {A Review on the Poly (Vinyl Chloride) Plastisol Coatings and Its Rheology}, journal = {Journal of Studies in Color World}, volume = {10}, number = {3}, pages = {13-28}, year = {2020}, publisher = {Institute for Color Science and Technology}, issn = {2251-7278}, eissn = {2383-2223}, doi = {}, abstract = {Coatings based on plastisol or paste of poly (vinyl chloride), which are mainly used as flooring and automotive underbody coatings, are a special type of coating that has a limited amount of volatile solvent. Due to the high concentration of the resin and the possibility of applying high thickness, this type of coating has excellent mechanical properties, corrosion resistance, and thermal insulation properties. The mechanism of film formation of this type of coating is also different so that after applying it on the substrate, the microstructures are changed by heating, thus the paste becomes a physical gel. Then with the further increase of temperature, the fusion process begins, in which the gel is melted and reaches the final properties while homogenizing and leveling. It is important to study the rheology of plastisol coatings, both at the beginning which is in the form of a paste that is usually applied by spraying and after being subjected to gelation and fusion processes, which can be controlled using rheology. In this article, we will first introduce plastisol, its components followed by gelation and fusion processes, and lastely we will review the factors affecting the rheology of poly (vinyl chloride) plastisol.  }, keywords = {Plastisol,poly (vinyl chloride),automotive underbody coating,gelation and fusion,Rheology}, title_fa = {مروری بر پوشش‌های پلاستی‌سول پلی(وینیل کلراید) و رئولوژی آن}, abstract_fa = {پلاستی‌سول یا خمیرهای بر پایه رزین پلی(وینیل کلراید) که به عنوان کف‌پوش، عایق زیربدنه خودرو و دیگر مصارف مشابه استفاده می‌شوند، نوع خاصی از پوشش هستند که دارای مقدار محدودی حلال فرار می‌باشند. این نوع پوشش به دلیل غلظت زیاد رزین و امکان اعمال ضخامت بالا، خواص مکانیکی، مقاومت خوردگی و خواص عایق گرمایی بسیار خوبی دارد. سازوکار تشکیل فیلم این نوع پوشش نیز متفاوت است به این ترتیب که پس از اعمال آن روی سطح، با گرمادهی ریزساختار‌ها تغییر کرده و خمیر به حالت ژل فیزیکی می‌رسد. سپس با افزایش بیشتر دما فرآیند ذوب آغاز می‌شود و طی آن ژل حاصله ذوب می‌گردد و ضمن همگن‌شدن و هم‌ترازی به خواص نهایی می‌رسد. مطالعه رئولوژی در این نوع پوشش حائز اهمیت است، زیرا پلاستی‌سول در ابتدا حالت خمیری دارد و معمولا به روش افشاندن اعمال می‌شود و کنترل فرآیند‌های ژل و ذوب نیز با استفاده از رئولوژی امکان‌پذیر است. در این مقاله ابتدا به معرفی پلاستی‌سول، ترکیبات آن و فرآیند‌های ژل و ذوب می‌پردازیم، سپس مروری بر عوامل موثر بر رئولوژی آن خواهیم داشت.}, keywords_fa = {پلاستی‌سول,پلی(وینیل کلراید),پوشش زیر‌بدنه خودرو,ژل و ذوب,رئولوژی}, url = {https://jscw.icrc.ac.ir/article_81730.html}, eprint = {https://jscw.icrc.ac.ir/article_81730_977f366bb92a2bff97d549282aff7a21.pdf} } @article { author = {Mohammad Raei Nayini, Mohsen and Jalili, Mojtaba and Ranjbar, Zahra}, title = {Printed Electronics, Based on Carbon Nanotubes and Graphene Nanosheets}, journal = {Journal of Studies in Color World}, volume = {10}, number = {3}, pages = {29-42}, year = {2020}, publisher = {Institute for Color Science and Technology}, issn = {2251-7278}, eissn = {2383-2223}, doi = {}, abstract = {Printed electronics has attracted great consideration in recent years, both scientifically and commercially. The attention to printed electronics is attributed to the fact that they facilitate the production of low cost, flexible electronics on various substrates and in large scales. The main functional component of printed electronic inks, is the conductive nanoparticles that are incorporated into them. Among different conductive components that can be incorporated into printing inks, metal nano particles, metal nano wires, graphene nanosheets, carbon nanotubes and conductive polymers are more common. The reasonable properties and relatively low cost of graphene nanosheets and carbon nanotubes, provide them a considerable capability to be used in electronic applications such as sensors, semiconductors, transparent electrodes and flexible and printed electronics. Herein, different aspects and recent developments in printed and flexible electronics has been overviewed with the emphasize on utilizing graphene nanosheets and carbon nanotubes in printing inks. }, keywords = {Printed electronics,Flexible electronics,graphene,Carbon nanotubes,Conductive ink}, title_fa = {الکترونیک چاپی بر پایه نانولوله‌های کربنی و نانوصفحات گرافن}, abstract_fa = {در سال‌های اخیر، الکترونیک چاپی، از هر دو بعد پژوهشی و تجاری مورد توجه گسترده‌ای قرار گرفته است. این توجه از آن جهت بوده است که با بهره‌گیری از الکترونیک چاپی، می‌توان قطعات الکترونیکی را در مقیاس گسترده، قیمت پایین، بر روی بسترهای گوناگون و حتی با قابلیت انعطاف‌پذیری تولید نمود. جز عملگر اصلی در جوهرهای الکترونیک چاپی، نانوذرات رسانای موجود در آنها است. از میان انواع ساختارهای رسانا که می‌توانند در جوهرهای چاپ استفاده شوند، بهره‌گیری از نانوذرات فلزی، نانوسیم‌های فلزی، نانوصفحات گرافن، نانولوله‌های کربنی و پلیمرهای رسانا متداول‌تر است. نانوذرات گرافن و نانولوله‌های کربنی، به واسطه‌ی برخورداری از خواص ویژه‌ و قیمت مناسبی که دارند، ظرفیت خوبی برای استفاده در انواع کاربردهای الکترونیکی نظیر حسگرها، نیمه‌رساناها، الکترودهای شفاف و مدارهای انعطاف‌پذیر دارند. در این مقاله، جنبه‌های مختلف الکترونیک چاپی و آخرین پیشرفت‌های این حوزه، با تاکید بر بهره‌گیری از نانوذرات گرافن و نانولوله‌های کربنی در جوهرهای چاپ مرور گردیده‌اند.}, keywords_fa = {الکترونیک چاپی,الکترونیک انعطاف‌پذیر,گرافن,نانولوله کربنی,جوهر رسانا}, url = {https://jscw.icrc.ac.ir/article_81716.html}, eprint = {https://jscw.icrc.ac.ir/article_81716_20b97ba22b5378e9b50d8cc092a3de21.pdf} } @article { author = {Sedighian, Bita and Jafari, Razieh and Nasiri, Morteza and Mahdavian, Mohammad}, title = {Investigation of Dirt Pickup of Facade Coating from the Color Appearance View Point}, journal = {Journal of Studies in Color World}, volume = {10}, number = {3}, pages = {43-53}, year = {2020}, publisher = {Institute for Color Science and Technology}, issn = {2251-7278}, eissn = {2383-2223}, doi = {}, abstract = {Buildings façade is one of the most significant factors to make the city concinnity; for this reason, special attention should be paid to aesthetics and cleaning them from pollution. The uncontrolled expansion of urban population growth in the world is the main cause of serious environmental problems and pollution in cities. In the construction industry, chemical, fungal and bacterial contaminants and also airborne particles are major environmental pollutants that directly affect on the building façade. This article review the various coatings used on the building facade, such as antibacterial and antifungal coatings, self-cleaning coatings and hydrophobic coatings, for increasing the age of color appearance and dirt resistance of the façade. Furthermore, various methods of measuring dirt-pickup of coatings have been investigated. Colorimetric methods are used to evaluate and measure dirt-pickup of the samples. The purpose of measurement is to select a suitable coating with ideal dirt resistance, to be used in various applications to maintain cleanliness and prevent discoloration of coatings over time.  }, keywords = {Building Facade,Color Appearance,Color difference,Dirt-Pickup}, title_fa = {بررسی پدیده کثیفی پوشش‌های ساختمانی از منظر ظاهر رنگی}, abstract_fa = {نمای ساختمان‌ها در زیبا نمودن جلوه شهر، از اهمیت بالایی برخوردار است؛ به همین دلیل باید به زیباسازی و پاک‌نمودن آن‌ها از آلودگی توجه خاصی مبذول داشت. گسترش بی رویه شهرها در جهان، عامل اصلی پدید آمدن مشکلات جدی زیست‌محیطی و آلودگی در شهرها می‌باشد. در صنعت ساخت و ساز، آلودگی‌های شیمیایی، قارچی و باکتریایی و ذرات معلق در هوا از جمله موارد عمده آلودگی‌های زیست‌محیطی به شمار می‌روند که به صورت مستقیم بر روی نمای ساختمان تاثیر می‌گذارند. در این مقاله به ارزیابی و بررسی پوشش‌های مختلف به کار رفته بر روی نمای ساختمان، نظیر، پوشش‌های ضد‌باکتری و ضد‌قارچ، پوشش‌های خود‌تمیز‌شونده و پوشش‌های آب‌گریز، جهت طولانی‌ کردن عمر ظاهر رنگی و افزایش مقاومت در برابر کثیفی نما پرداخته می‌شود. همچنین روش‌های مختلف اندازه‌گیری کثیفی پوشش‌ها بررسی شده است. روش‌‌‌‌های رنگ‌سنجی جهت ارزیابی و اندازه‌گیری کثیفی نمونه‌‌‌‌ها، مورد استفاده قرار می‌‌‌‌گیرند. هدف از این اندازه‌گیری، انتخاب پوشش مناسب با مقاومت در برابر کثیفی ایده‌‌‌‌آل، برای به کار بردن در مصارف مختلف جهت حفظ تمیزی و جلوگیری از تغییر رنگ پوشش‌‌‌‌ها در گذر زمان می‌‌‌‌باشد.}, keywords_fa = {نمای ساختمان,ظاهر رنگی,اختلاف رنگ,چرک‌پذیری}, url = {https://jscw.icrc.ac.ir/article_81731.html}, eprint = {https://jscw.icrc.ac.ir/article_81731_e0c4f6bce6e9720f211875ec5925130c.pdf} } @article { author = {Razani, mehdi and Nemani Khiyavi, Leyli}, title = {A Review of Consolidation of Stone with Nanotechnology}, journal = {Journal of Studies in Color World}, volume = {10}, number = {3}, pages = {55-64}, year = {2020}, publisher = {Institute for Color Science and Technology}, issn = {2251-7278}, eissn = {2383-2223}, doi = {}, abstract = {Consolidation is one of the most important elements of conservation of historical objects, especially stone monuments. This term is meant to increase the internal resistance of the effect against current disintegration and hedging against future hazards and is done using various materials and methods. The various materials that are produced and used for this purpose include organic, inorganic, composite, biological and nano-particle materials, each of which is prescribed to the private characteristic of the effect. The aim of this study was to review the application of nano-structure material technology in the robustness of stone works, which has dramatically improved in the recent years after production in the field of conservation science and solve various problems in the field of preventing the destruction of historical monuments. This study investigated the robustness of nano-materials and the results of the method of the effect of methods and the depth of penetration of nano-materials in order to achieve the reasoning of these methods of comprehensive strength-part with nano particles.}, keywords = {Consolidation,conservation,restoration,Nanoparticles,stone,Rock}, title_fa = {مروری بر استحکام‌بخشی سنگ با استفاده از فناوری نانو}, abstract_fa = {استحکام‌بخشی، ازجمله مهم‌ترین مراحل حفاظت از آثار تاریخی به‌ویژه سنگ و آثار سنگی ساختمانی محسوب می‌‌شود. این واژه به معنای افزایش مقاومت درونی اثر در مقابل اضمحلال فعلی و مصون‌سازی در برابر مخاطرات آتی است و با استفاده از مواد و روش‌‌های گوناگونی انجام می‌‌گیرد. مواد مختلفی که به این منظور تولید و استفاده می‌‌شود شامل مواد آلی، معدنی، کامپوزیت، مواد پایه‌‌ زیستی و نانو ذرات هستند که هرکدام برای ویژگی به خصوصی از اثر تجویز می‌‌گردد. هدف از این پژوهش، مروری بر کاربرد فناوری مواد نانو ساختار در استحکام‌‌بخشی آثار سنگی است که در چند سال اخیر پس از تولید درزمینه علم حفاظت، پیشرفت چشمگیری کرده و مشکلات مختلفی را درزمینه‌ی جلوگیری از نابودی آثار تاریخی حل نموده‌‌اند. این تحقیق استحکام‌بخشی با نانو مواد را موردمطالعه قرار داده و نتایج حاصله را در مورد نحوه تأثیر روش‌‌های اعمال و عمق نفوذ نانو مواد سنجیده تا بتوان از میان این روش‌‌ها استدلالی جامع در مورد استحکام‌‌بخشی با نانو ذرات کسب کرد.}, keywords_fa = {استحکام‌بخشی,حفاظت,مرمت,نانو ذرات,سنگ}, url = {https://jscw.icrc.ac.ir/article_81732.html}, eprint = {https://jscw.icrc.ac.ir/article_81732_c425cc0dd39279e82b60d28f15c2172b.pdf} } @article { author = {Fattahi, Farnaz-sadat and mousavi shoushtari, seyed ahmad}, title = {An Introduction to UV/Ozone Treatment and Its Applications in the Surface Engineering of Polymeric Fibers and Films}, journal = {Journal of Studies in Color World}, volume = {10}, number = {3}, pages = {65-76}, year = {2020}, publisher = {Institute for Color Science and Technology}, issn = {2251-7278}, eissn = {2383-2223}, doi = {}, abstract = {UV/Ozone treatment is a fast and environmentally friendly technique for surface modification of polymeric fibers and films. In this study, UV/Ozone treatment and important factors of this method are introduced and the mechanism of this process has been investigated from various aspects (chemical and physical). The formation of free radicals on the surface (due to photochemical interactions) and the formation of surface roughness (due to the effect of physical etching) are two key factors in the surface engineering of polymeric fibers and films by UV/Ozone irradiation. Furthermore, the applications of UV/Ozone treatment on polymeric fibers and films are briefly stated and as a case study, the researchers are discussed on modification of the surface properties of polymeric fibers and films via this method. This treatment can increase the dyeing depth of the fibers. Also, UV/Ozone treatment has been used to improve the antistatic and hydrophilic properties of polymeric fibers and films, and the results of these studies have been reviewed in this review.}, keywords = {UV/Ozone irradiation,Surface engineering,Fibers,Ecofriendly,Surface Analysis}, title_fa = {مقدمه‌ای بر عمل‌آوری با تابش فرابنفش/ ازن و کاربرد آن در مهندسی سطح الیاف و فیلم‌های پلیمری}, abstract_fa = {تابش فرابنفش/ ازن فناوری سریع و سازگار با محیط زیست برای اصلاح خواص سطح الیاف و فیلم‌های پلیمری ‌می‌‌باشد. در این مقاله ضمن معرفی عمل آوری تابش فرابنفش/ ازن و عوامل مهم این پروسه، سازوکار عملکرد این فرآیند از جنبه‌های گوناگون (شیمیایی و فیزیکی) بررسی شده است. شکل‌گیری رادیکال‌های آزاد بر سطح (به دلیل فعل و انفعالات نورشیمیایی) و ایجاد زبری‌های سطحی (به‌دلیل اثر اچ فیزیکی)، دو عامل کلیدی در مهندسی سطح الیاف و فیلم‌های پلیمری توسط تابش فرابنفش/ازن ‌می‌‌باشند. درادامه، موارد کاربرد عمل‌آوری تابش فرابنفش/ازن روی الیاف و فیلم‌های پلیمری به اجمال بیان شده و به عنوان مطالعه موردی، پژوهش‌های انجام شده درباره اصلاح خواص سطح الیاف و فیلم‌های پلیمری به کمک این فناوری بحث و بررسی شده است. این عمل‌آوری ‌می‌‌تواند سبب افزایش عمق رنگرزی بر الیاف شود. همچنین، از تابش فرابنفش/ازن برای بهبود خواص ضد‌الکتریسیته و آب‌دوستی الیاف و فیلم‌های پلیمری استفاده شده که در این مرور نتایج پژوهش‌های مزبور نیز بررسی شده است.}, keywords_fa = {تابش فرابنفش/ازن,مهندسی سطح,الیاف,سازگار با محیط زیست,آنالیز سطح}, url = {https://jscw.icrc.ac.ir/article_81733.html}, eprint = {https://jscw.icrc.ac.ir/article_81733_a514cdcdd9704c128c1cc204dcd00205.pdf} }