مروری بر کاربرد فناوری چاپ سه‌بعدی در تصفیه پساب نساجی

نوع مقاله : مقاله مروری

نویسندگان

1 کارشناس، دانشکده مهندسی نساجی، دانشگاه یزد، یزد، ایران، صندوق پستی 741-89195.

2 استادیار، دانشکده مهندسی نساجی، دانشگاه یزد، یزد، ایران، صندوق پستی 741-89195.

چکیده

مواد رنگزا، فلزات سنگین و سایر آلاینده‌های موجود در پساب صنایع مختلف سبب بروز نگرانی‌هایی در محققان و علاقمندان محیط‌زیست گردیده است. در سال‌های اخیر مواد مختلفی توسط محققان به‌عنوان جاذب‌های با عملکرد بالا و زیست‌سازگار پیشنهاد شده است. امروزه فناوری چاپ سه‌بعدی به دلیل پتانسیل قابل‌توجه در تولید سریع سازه‌هایی با هندسه پیچیده و متخلخل نسبت به فرآیندهای متداول، مورد توجه بسیاری از محققان در حوزه‌های مختلف قرار گرفته است. در سال‌های اخیر چاپ سه‌بعدی مواد مبتنی بر پلیمر به دلیل انعطاف‌پذیری بالا در طراحی ساختارهای پیچیده، در فرآیندهای تصفیه پساب و حذف رنگزا مورد استفاده قرار گرفته است. از این‌رو در این مقاله سعی گردیده تا ضمن معرفی انواع چاپگرهای سه‌بعدی به بیان چالش‌های موجود در فرآیندهای ساخت و ویژگی‌های هر یک از آنها پرداخته شود. علاوه بر این پیشرفت‌های اخیر محققان در توسعه ساختارهای ویژه چاپ سه‌بعدی و کاربرد آنها در حذف آلاینده‌هایی نظیر مواد رنگزا و فلزات سنگین از پساب مورد بررسی قرار گرفته است.

کلیدواژه‌ها

موضوعات

عنوان مقاله [English]

A Review of the Application of 3D Printing Technology in Textile Wastewater Treatment

نویسندگان [English]

  • Hanieh Rajabi 1
  • Mahdi Hasanzadeh 2
1 Department of Textile Engineering, Yazd University, P. O. Box: 89195-741, Yazd, Iran.
2 Department of Textile Engineering, Yazd University, P. O. Box: 89195-741, Yazd, Iran.
چکیده [English]

Dyes, heavy metals, and other pollutants in the wastewater of various industries have caused concern among researchers and environmentalists. Researchers have proposed multiple materials in recent years as high-performance, biocompatible adsorbents. Today, 3D printing technology has attracted the attention of many researchers in various fields due to its significant potential for the rapid production of structures with complex and porous geometry compared to conventional processes. In recent years, 3D printing of polymer-based materials has been used in wastewater treatment and dye removal processes due to its high flexibility in the design of complex structures. Therefore, while introducing different types of 3D printers in this review, we have tried to express the manufacturing processes' challenges and characteristics. In addition, recent advances in the development of 3D printing structures and their application in removing pollutants such as dyes and heavy metals from wastewater have been studied.

کلیدواژه‌ها [English]

  • 3D printing
  • Wastewater treatment
  • Dye removal
  • Adsorption

مراجع

  1. M. Atighi, M. Hasanzadeh, Application of mXene and its composites in the removal of dyes, heavy metals and radionuclides pollutant from industrial and nuclear wastewater, J. Stud.  Color world, 11, 13-32, 2022.
  2. F. Khosravi, M. Soltan, M. Hajiani, A. Haji, "Application of Polymeric Nanofibers for Removal of Dyes Graphical abstract", J. Stud. Color World, 9. 39–62. 2019.
  3. S. Dutta, B. Gupta, S.K. Srivastava, A.K. Gupta," Recent advances on the removal of dyes from wastewater using various adsorbents: A critical review", Mater. Adv. 2, 4497–4531, 2021.
  4. T. Shindhal, P. Rakholiya, S. Varjani, A. Pandey, H.H. Ngo, W. Guo, H.Y. Ng, M.J. Taherzadeh, A critical review on advances in the practices and perspectives for the treatment of dye industry wastewater, Bioengineered. 12, 70–87, 2021.
  5. M.A. T. Aghebati, M. Nouri, "Dye removal textil effluent using polyacrylonitrile hollow fiber member", J. Color Sci. Technol. 9, 185–177, 2015.
  6. M.J. Uddin, R.E. Ampiaw, W. Lee, "Adsorptive removal of dyes from wastewater using a metal-organic framework: A review", Chemosphere. 284, 131314, 2021.
  7. S. Pai, M.S. Kini, R. Selvaraj, "A review on adsorptive removal of dyes from wastewater by hydroxyapatite nanocomposites", Environ. Sci. Pollut. Res. 28. 11835–11849, 2021.
  8. Y.Y. Lau, Y.S. Wong, T.T. Teng, N. Morad, M. Rafatullah, S.A. Ong," Degradation of cationic and anionic dyes in coagulation–flocculation process using bi-functionalized silica hybrid with aluminum-ferric as auxiliary agent", RSC Adv. 5. 34206–34215, 2015.
  9. J. Dotto, M. R. Fagundes-Klen, M. T. Veit, S. M. P. R. Bergamasco, "Performance of different coagulants in the coagulation/flocculation process of textile wastewater", J. Cleaner Prod. 208, 656–665, 2019.
  10. P. Chanikya, P. V. Nidheesh, D. Syam Babu, A. Gopinath, M. Suresh Kumar, "Treatment of dyeing wastewater by combined sulfate radical based electrochemical advanced oxidation and electrocoagulation processes", Sep. Purif. Technol.254, 117570, 2021.
  11. R. Javaid, U.Y. Qazi, "Catalytic Oxidation Process for the Degradation of Synthetic Dyes: An Overview", Int. J. Environ. Res. Public Heal. 16, 2066, 2019.
  12. S. Venkatesh, K. Venkatesh, "Ozonation for Degradation of Acid Red 14: Effect of Buffer Solution", Proc. Natl. Acad. Sci. India Sect. A. Phys. Sci. 90, 209–212, 2020.
  13. J. Wu, T. Wang, J. Wang, Y. Zhang, W.P. Pan, "A novel modified method for the efficient removal of Pb and Cd from wastewater by biochar: Enhanced the ion exchange and precipitation capacity", Sci. Total Environ. 754. 142150. 2021.
  14. L. Zhang, L. Xu, H. Yu, P. Yao, M. Zhang, F. Guo, L. Yu, "Capsaicin mimic-polyethyleneimine crosslinked antifouling loose nanofiltration membrane for effective dye/salt wastewater treatment", J. Memb. Sci. 641. 119923. 2022.
  15. Y. Kang, J. Jang. Kim, J. Lim, Y. Lee, I.S. Kim, "PIP/TMC interfacial polymerization with electrospray: novel loose nanofiltration membrane for dye wastewater treatment", ACS Appl. Mater. Interfaces. 12. 36148–36158. 2020.
  16. T. Ahmad, C. Guria, A. Mandal, "A review of oily wastewater treatment using ultrafiltration membrane: A parametric study to enhance the membrane performance", J. Water Process Eng. 36, 101289, 2020.
  17. R. H. Hailemariam, Y. C. Woo, M. M. Damtie, B. C. Kim, K. D. Park, J.S. Choi, "Reverse osmosis membrane fabrication and modification technologies and future trends: A review", Adv. Colloid Interface Sci. 276, 102100, 2020.
  18. Ç. Odabaşı, P. Dologlu, F. Gülmez, G. Kuşoğlu, Ö. Çağlar, "Investigation of the factors affecting reverse osmosis membrane performance using machine-learning techniques", Comput. Chem. Eng. 107669, 2022.
  19. M. A. Moradkhani, T. Kikhavani, S.H. Hosseini, B. Van Der Bruggen, B. Bayati," Applying intelligent approaches to estimate the removal efficiency of heat stable salts from lean amine via electrodialysis", Int. J. Greenh. Gas Control. 113, 103548, 2022.
  20. G.M. Didier de Vasconcelos, J. Mulinari, S.M. de Arruda Guelli Ulson de Souza, A.A. Ulson de Souza, D. de Oliveira, C.J. de Andrade," Biodegradation of azo dye-containing wastewater by activated sludge: a critical review", World J. Microbiol. Biotechnol. 37, 1–12, 2021.
  21. M.K. Mehrizi, Z. Shahi, "The Study of Effective Factors on the Removal of Heavy Metals from Wastewater by Using Adsorbents Materials (Biosorbents- Natural)", J. Stud. Color World, 9, 39–62, 2019.
  22. L.D. Tijing, J.R.C. Dizon, I. Ibrahim, A.R.N. Nisay, H.K. Shon, R.C. Advincula," 3D printing for membrane separation, desalination and water treatment", Appl. Mater. Today. 18, 100486, 2020.
  23. A.J. Kandeloos, S. Bastani, S. Mashayekhan, "3D Bioprinting and Natural Bioinks: Principles and Applications", J. Color Sci. Technol. 10, 31–51, 2021.
  24. A. Mashak, A. Ghaee, H. Mobedi," Application of 3D Printing Technology in Novel Drug Delivery Systems:A Review", Polym. Sci. Q. 8, 45–56, 2018.
  25. M.N. Nadagouda, M. Ginn, V. Rastogi," A review of 3D printing techniques for environmental applications", Curr. Opin. Chem. Eng. 28, 173–178, 2020.
  26. N. Yanar, P. Kallem, M. Son, H. Park, S. Kang, H. Choi," A New era of water treatment technologies: 3D printing for membranes", J. Ind. Eng. Chem. 91, 1–14, 2020.
  27. A. Savini, G.G. Savini," A short history of 3D printing, a technological revolution just started", Proc. icohtec/ieee int. hist. high-technologies their socio-cultural context. Conf. histelcon, 4th IEEE , Hist. Electrotechnol, 2015.
  28. A. E. Jakus, "An introduction to 3D printing—past, present, and future promise", 3D Print. Orthop. Surg. 1–15, 2019
  29. J. Rafiei, A.R. Ghasemi, A Brief review on three-dimensional printed continuous fiber-reinforsed polymer composites, Polym. Sci. Q. 11, 44–60, 2021.
  30. N.H. Mohd Yusoff, L.R. Irene Teo, S.J. Phang, V.L. Wong, K.H. Cheah, S.S. Lim, "Recent advances in polymer-based 3D printing for wastewater treatment application: an overview", Chem. Eng. J. 429, 132311, 2022.
  31. M. N. Issac, B. Kandasubramanian, "Review of manufacturing three-dimensional-printed membranes for water treatment", Environ. Sci. Pollut. Res. 27. 36091–36108, 2020.
  32. H. A. Balogun, R. Sulaiman, S. S. Marzouk, A. Giwa, S. W. Hasan, "3D printing and surface imprinting technologies for water treatment: A review", J. Water Process Eng. 31. 100786, 2019.
  33. T.D. Ngo, A. Kashani, G. Imbalzano, K.T.Q. Nguyen, D. Hui, "Additive manufacturing (3D printing): a review of materials, methods, applications and challenges", Compos. Part B Eng. 143, 172–196, 2018.
  34.  Z.X. Low, Y.T. Chua, B.M. Ray, D. Mattia, I.S. Metcalfe, D.A. Patterson, "Perspective on 3D printing of separation membra and comparison to related unconventional fabrication techniques", J. Memb. Sci. 523, 596–613, 2017.
  35. D.E. Mouzakis, "Advanced technologies in manufacturing 3D-Layered structures for defense and aerospace", Lamination - Theory and Application, 74331, 2018.
  36.  J.Š. and J.K. Václav Dvořák, Radek Votrubec," Experimental investigation of centrifugal fans for personal protection equipment–effect of used 3D printing technologies", Epj-Conferences.Org, 180, 5, 2018.
  37. Z. Wang, J. Wang, M. Li, K. Sun, C.J. Liu, "Three-dimensional printed acrylonitrile butadiene styrene framework coated with Cu-BTC metal-organic frameworks for the removal of methylene blue", Sci. Rep. 4, 4–10, 2014.
  38. A. Figuerola, D.A.V. Medina, A.J. Santos-Neto, C.P. Cabello, V. Cerdà, G.T. Palomino, F. Maya," Metal–organic framework mixed-matrix coatings on 3D printed devices", Appl. Mater. Today, 16, 21–27, 2019.
  39. R. Pei, L. Fan, F. Zhao, J. Xiao, Y. Yang, A. Lai, S.F. Zhou, G. Zhan," 3D-Printed metal-organic frameworks within biocompatible polymers as excellent adsorbents for organic dyes removal", J. Hazard. Mater. 384, 121418, 2020.
  40. A. Vyatskikh, A. Kudo, S. Delalande, J.R. Greer, "Additive manufacturing of polymer-derived titania for one-step solar water purification", Mater. Today Commun. 15, 288–293, 2018.
  41. A. Sangiorgi, Z. Gonzalez, A. Ferrandez-Montero, J. Yus, A.J. Sanchez-Herencia, C. Galassi, A. Sanson, B. Ferrari, " 3D printing of photocatalytic filters using a biopolymer to immobilize TiO2 nanoparticles", J. Electrochem. Soc. 166, 3239–3248, 2019.
  42. M.J. Martín de Vidales, A. Nieto-Márquez, D. Morcuende, E. Atanes, F. Blaya, E. Soriano, F. Fernández-Martínez," 3D printed floating photocatalysts for wastewater treatment", Catal. Today. 328, 157–163, 2019.
  43. Y. De Rancourt De Mimérand, K. Li, J. Guo, "Photoactive Hybrid Materials with Fractal Designs Produced via 3D Printing and Plasma Grafting Technologies", ACS Appl. Mater. Interfaces. 11, 24771–24781, 2019.
  44. M. Fathizadeh, H.N. Tien, K. Khivantsev, J.T. Chen, M. Yu," Printing ultrathin graphene oxide nanofiltration membranes for water purification", J. Mater. Chem. A. 5. 20860–20866, 2017.
  45. A. Masud, C. Zhou, N. Aich," Emerging investigator series: 3D printed graphene-biopolymer aerogels for water contaminant removal: a proof of concept", Environ. Sci. Nano. 8, 399–414, 2021.
  46. D. Zhang, J. Xiao, Q. Guo, J. Yang, "3D-printed highly porous and reusable chitosan monoliths for Cu(II) removal", J. Mater. Sci. 54, 6728–6741, 2019.
  47. G.A. Appuhamillage, D.R. Berry, C.E. Benjamin, M.A. Luzuriaga, J.C. Reagan, J.J. Gassensmith, R.A. Smaldone, A biopolymer-based 3D printable hydrogel for toxic metal adsorption from water, Polym. Int. 68, 964–971, 2019.
  48. Y. Miao, W. Peng, W. Wang, Y. Cao, H. Li, L. Chang, Y. Huang, G. Fan, H. Yi, Y. Zhao, T. Zhang," 3D-printed montmorillonite nanosheets based hydrogel with biocompatible polymers as excellent adsorbent for Pb(Ⅱ) removal", Sep. Purif. Technol. 283, 120176, 2022.
  49. P. Sun, L. Zhang, S. Tao," Preparation of hybrid chitosan membranes by selective laser sintering for adsorption and catalysis", Mater. Des. 173, 107780, 2019.
  50. A. Khalil, R. Hashaikeh, N. Hilal, "3D printed zeolite-Y for removing heavy metals from water", J. Water Process Eng. 42, 102187, 2021.

 

مطالعات در دنیای رنگ
دوره 12، شماره 1
تیر 1401
صفحه 1-20

فایل ها

سابقه مقاله

  • تاریخ دریافت: 03 بهمن 1400
  • تاریخ بازنگری: 23 بهمن 1400
  • تاریخ پذیرش: 18 اسفند 1400

هم رسانی

ارجاع به این مقاله

آمار